Dead on audio or video

What exactly is wrong with you unit? Dead, no output...........?

For more information or repair, please visit my website at audioserviceclinic.com. You may contact me directly through my website.

Thank you.

If it is plugged in to a working outlet, and the AC cord is not broken, there is a problem in the power supply of the receiver. This provides all of the DC voltages that make all functions work. If it is completely dead, the display, the lights, the audio, (everything) is not working; and it is not likely there are separate problems in all of these areas at the same time.

It says Zenith here and if different let me know----if the convergence failed and took a resistor or fuse device (not a glass fuse) out the set will be dead--set detects no voltage to that area and shuts down for protection.

Check speaker wiring for shorts, if okay, the audio output semiconductors in the dead channel need to be investigated.

Try this advice:

http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12954406270641

"Dead" Remotes Can Be Saved

How to Re-Start Your "Dead" Remote Control

This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!

If that doesn

Check the wiring to the speakers and amp, if no change, it indicates audio output ic problem. I recommend a technician to further examine the unit.

Ur LCD inverter board is dead.Replaced this inverter board will get ur picture back.Tries Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.It a long shape board.

dead, dead, dead.

Ur video board is dead.Or the video socket connect to the CRT(tv tube) is cold solder.