QOS on D-link dir-625

I have a d-link dir 625 router. I have voip (lingo is the provider) and I have the voip device connected to one of the LAN ports on the router. I would like to use the QOS such that everytime I am on a call, the call gets the highest priority. I have tried amny different settings on the QOS page of the router but could not get it to work. Can you please describe how I get QOS to work. I tested the QOS by talking on the phone while doing ssome heavy downloading. Using the phone while downloading still caused breakups in the call and the download speed did not fall. So what could be wrong?

nohtanhojc Feb 09, 2009

i gots a d-link dir-655 - i blew the extra money in hopes of a better qos service. no luck so far, tried many different settings. i had the same problem with my linksys wrt54gs v7 (up until my mom watered the plants... and well... that's why i'm trying out a new router). i've played around with QOS, WISH, and random port prioritization here and there, yet still no luck so far. also, anyone know how to limit bandwidth to certain users?

thanks,
d-link newbie

1 Answer

Anonymous

Contributor 5 Answers
Posted on Jan 31, 2008

Anonymous

Contributor

Joined: Jan 31, 2008

Answers

Questions

Helped

4699

Points

Buy a linksys wrg series router and smash that dlink peice of junk into tiny little pieces, put them into a bag and mail to dlink, with a letter describing your opinion of their products.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

I don't know how to reset password for d-link DIR-625

Section 1 - Product OverviewHardware OverviewConnectionsUSB Connect a USB 1.1 or 2.0 flash drive to configure the wireless settings using WCN.Reset Pressing the Reset button restores the router to its original factory default settings.LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs.Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.Power Receptor Receptor for the supplied power adapter.D-Link DIR-65 User Manual

If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Read full answer

Sep 23, 2011 • D-Link DIR-625 (790069292637) Wireless...

0helpful

1answer

I need to set my password for my di-625 router.

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browserand enter the D-Link's configuration URL. OR open the browser on your laptopand enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now configure the wireless settings.

Read full answer

Mar 18, 2011 • D-Link DIR-625 (790069292637) Wireless...

0helpful

1answer

My son has just ought a new l/top , he has cable connection to his existing comp and wants to use the one provider to connect his new laptop as well. using D-Link DIR-600 Router ,how does he do this.

He can connect a LAN cable from another RJ45 port on the router to his laptop provided the router has sufficient LAN ports.
OR
He can connect the laptop using a wireless connection provided the laptop has a wireless card.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Read full answer

Feb 13, 2011 • D-Link DIR-600 Router

0helpful

1answer

How do you hook up a dlink router to a telus modem, the WLAN connection won't work.

Hello,

Newer telus modems tend to be wireless.
If your telus modem is wireless, then you want to forget the DIR-625 all together and simply connect your computers to the telus modem.

If you have a standard telus modem, you will want to connect a LAN cable from the modem to the WAN port on the router and then connect your devices to the router.

Please come back and vote or leave some feedback, it will let me know whether it helped so I can improve and it will encourage me to keep on helping.

Thanks,

Pat

Read full answer

Mar 31, 2010 • D-Link DIR-625 (790069292637) Wireless...

0helpful

1answer

Driver

not sure why you will need USB drivers for your adsl2+ modem/ wireless router and 4 port LAN switch. It would help you had provided the model number.

The device uses a LAN ethernet port to connect to the computer. You will need atleast one computer to be on the LAN port for setting it up. Once setup is complete you can use wireless connection for every computer.

The user manual & drivers or the DSL-2740B which appears similar to your product description
http://www.dlink.com.au/tech/Download/download.aspx?product=DSL-2740B

Not sure if you need these. Your computers will need LAN or wireless drivers to connect to this DLINK modem/ router.

Good luck

Read full answer

Dec 25, 2009 • D-Link ADSL2/2+ Modem/Wireless Router...

0helpful

1answer

Port forwarding with DIR-625 (wireless environment)

Does your modem has a NAT too? if not then upgrade the firmware of the router that usually fix the problem, if not then ask your ISP and see if they are blocking the ports. have you tried connection without the router to see if that will work?

Read full answer

Sep 09, 2009 • D-Link DIR-625 (790069292637) Wireless...

0helpful

1answer

I have installed 2 delink routers for my Mac, I still cannot get on line. the mac is new, what is the problem?

Try to configure the DIR-625 wireless router. Connect your computer to one of the LAN port to one of the router. Then access the IP address of the router (192.168.0.1) configure as dynamic IP then clone the MAC address. Make sure that you modem is connected to Internet port section of the router. Check the Internet connection after the configuration leave the other behind check the connection of the main router before installing the other one.

Read full answer

Mar 10, 2009 • D-Link DIR-625 (790069292637) Wireless...

1helpful

1answer

How do I open port 30000 in a DIR-625 router?

Hello marquitos4,

Go to http://portforward.com/english/routers/port_forwarding/Dlink/DIR-625/DIR-625index.htm
and you will find all the info you need regarding port forwarding through your D-Link router.

The page is specific to the DIR-625 but just about any make/model is supported at http://portforward.com/

Enjoy,

FixThemAll......

Read full answer

Dec 15, 2008 • D-Link DIR-625 (790069292637) Wireless...

0helpful

1answer

D-Link DIR-625

What you need to do is long into your router's configuration. For the D-links, all you have to do is open internet explorer. Type in 192.168.0.1 on the address bar and press enter. Once you get into the log in page, type in your username and password (not the same one as your wireless password). If you don't know. Try admin for username and leave password blank. It should work if you have not change the default password. Once inside the configuration page. Go to Advance, click on QoS engine on the left. Input the IP address of the VoIP box in the "source ip" , type in a name for your rule and select 1 for priority and input your ports for your VoIP box. The best thing you want to do is put your VoIP box before your router. That way you get better quality.

Read full answer

Oct 02, 2008 • D-Link DIR-625 (790069292637) Wireless...

6helpful

2answers

Cannot access the internet through my DIR-625

Check your IP address to 192.168.10.1 on the network settings
after that turn modem and VoIP off.
Click on Setup / Manual Internet
Select Dynamic IP under "My internet connection is"
Click on "Clone Your PC's Mac address"
Click on Save settings, if it ask for reboot click on reboot
After the router reboots (NOT COMPUTER), it will take you back to the router.
Once your are in the router, turn the modem on first then the VoIP.
After the modem and VoIP has finish rebootin
Click on the status tab of the router and check uder the "WAN"
Settings and check the IP address. If you get an IP address then check the internet.
If you do not get an IP address Click on Release and then renew.
If you still do not get an IP address click on Advance tab
Click on Advance network on the left and turn UPNP off and save the settings.
After that it should be able to get an IP address and you should be able to get online.

Read full answer

Nov 05, 2007 • D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?

View Most Popular

DIR-625 (790069292637) Wireless Router

Computers & Internet

I don't know how to reset password for d-link DIR-625

D-Link DIR-625 (790069292637) Wireless Router

757 views

Ask a Question

Usually answered in minutes!

Check Out the Mobile Browsers Report

View all Fixya Reports

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for D-Link DIR-625 (790069292637) Wireless Router? Or just drag it here!

Related Topics:

QOS on D-link dir-625