LG WM1814CW Front Load Washer Logo
Posted on Jan 29, 2008

LG WM1814CW Front load washer PF continues to come on and stops cycle

Our machine continues to have PF come on. If I start the entire machine over it will go through the wash and rinse cycles but stops with PF when the it's time for the spin cycle. The door is locked. Please help.

  • 2 more comments 
  • dfinkel Jan 30, 2008

    Discovered that the door was not latching. Works fine now.

  • Anonymous Apr 05, 2009

    Won't even get through wash and rinse cycle...just gives 'PF' error and shuts off.

  • Anonymous Mar 14, 2014

    My LGWM3987HW washer/dryer combo keeps stopping during the wash cycle and giving a false "door open" code. It has also begun to occasionally stick in the wash cycle and spin slowly for hours, until someone stops the machine. I clean it once a week.

  • Anonymous Mar 19, 2014

    its new didn't make noise before now started to produce that sound only during wash cycles at the start of the cycle for minutes the sound is constant the comes and goes

×

2 Answers

yvonne munro

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Mar 25, 2016
yvonne munro
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Mar 25, 2016
Answers
1
Questions
1
Helped
1092
Points
1

It washstand on a cold wash but any other wash pf comes up then it stops

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jan 29, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 29, 2008
Answers
1
Questions
0
Helped
1092
Points
5

Seen This before Main control board fixed it It would go through most of the wash cycle and just quit no errors but PF

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have an LG front load washer (model# wm1814cw). The machine stops mid cycle but gives no error code. I have to almost unload the washer entirely and then restart the cylce. If I try to begin the

Replaced the sensor and it rocks again. I was about to buy a new washer.
1. Remove the back panel
2. Remove the center bolt that hold the cap which covers the motor coil.
3. Pull the cover out.
4. Remove all the bolts that hold the motor coil. Be carefull not to drop the coil when you take the last bolt out.
5. Remove the old sensor and replace the new one.
6. Put back every thing and it will rock again.
0helpful
1answer
0helpful
1answer

My LG comes up with the error code PF

PF - Power Failure - PF error code indicates a power failure during the washer's cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks
0helpful
1answer

Flashing fp on my washing machine and stops half way through cycle please help

"PF" flashes if the washer loses power during a running cycle. The washer does not flash "PF" when it is first plugged in. Press START to continue the cycle from the moment that power was lost
-OR-
Press STOP/CANCEL to clear the display and completely cancel the cycle.
0helpful
1answer

PF code when on spin cycle

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances


heatman101



[]][\

1helpful
1answer

PF CODE COMES UP WHAT IS LIKELY PROBLE

Found the below at http://lgknowledgebase.com
The PF error code indicates a power failure. This might occur while machine is working due to an external disturbance like a storm or power outage in the area. If the PF error code is displayed, turn off the power to the washer, unplug it for 10 seconds, and restart the wash cycle. If the error code continues to present after these steps have been taken, then the washer may require service.
hope this helps,
best of luck, have fun,
thanks,
chuck
0helpful
1answer

Lg washer stops

probably a defective main pcb board; exception if any codes are displayed.
0helpful
1answer

Washer stops washing and gives a p5 trouble code

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle. Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Not finding what you are looking for?

1,102 views

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...