The toner motor has no command (24v).Separately the motor works ok .On hvt pcb I found ip301 (n38) burned and R335 (HV-10A-
500MN) seems interrupted or has a high resistance. I replaced n38 but i don't know what is R335
(fuse,resistor). With n38 replaced, the copy comes out completely black.
The toner motor still doesn't work. I will apreciate any suggestion.
Thanks!
Set toner container. The toner container is not set properly. Set the toner container properly. See page 5-5 of the operation guide.
Replace Waste Toner Box The waste toner box is full. Replace the waste toner box with a new one. See page 5-5 of the operation guide.
181 views
Usually answered in minutes!
×