Wharfedale tv no digital access

You need to do a Full Factory Reset tuning rather than just a rescan.

Rescan simply looks at the place holders where the old channels were stored and refreshes them. A Factory Reset (A.K.A. Shipping Condition) wipes the channel memories and starts again fresh

0312,0547 & 0065. hope these will work for you wharfedale appear to be all 4 digits in 2163 model

Please rate our help to keep the FREE service online ++++ Thanks for using Fixya

I have a tele C14T78 model and cant set the bright ness or contrast as i have no manual thankyou

it sounds as though your tuner may have given out on you

If you know your aerial is ok check if you can receive any analogue channels if not, is the tv going in to search but not finding anything. If it is a LCD tv I have had problems with the prescaler chip but be aware there are two versions of chassis with different prescaler boards.

hmm...similar problem here. i've taken the hdd out and plugged it in to the ide port inside my pc. The problem is it's the wrong file system. Your pc will not see it. It is however just a normal hdd so you can re-partition it and give it a new file systm ie ntfs but you lose all the data :(. that's as far as i've got, hope it helps someone.

Products such as this will use an internal tuner to tune channels, this tuner will not detect your televisions freeview stations, to record from your television, connect scart out from tv to the scart in on the recorder, then select the scart A/V channel, use the television to select the channel you want to record, you will not be able to record 1 freeview channel and watch another freeview chanel as you only have 1 digital tuner (in the television) the recorder does not have freeview built in.. hope that helps

hold down the menu button down for about 10 seconds,this will bring up tuning menu.

i have a wharfdale L22T11W-A LCD TV. have got sound but no picture, any ideas?

have 20" warfdale lcd tv cannot tune to samsung dvd recorder
any help recieved