Trying to program a new remote to my car alarm ''excaliber'' k9 remote

you can try out some guide from reliable-store
they also provide live chat feature for instant help and it's very useful
using that I fixed my
own excavator 5-6 times without any other help
plus free so whats harm in not getting

Hi Kim, When you ordered the new key the dealer should have asked for the chassis number? That gives them the codes to pre program. so that it should activate and deactivate the alarm, if that is the problem! ? Regards John

http://www.caralarm.com/manuals/Excalibur/AL-1000-SH.pdf

Check out page 15. There has to be a reset button somewhere. Have you found the unit and traced all the wires to there source?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

there are two methods you can try.
Method 1
If you have the administrator account password for the local computer and the best way to uninstall K9 web filter from the local computer is to re-install it! Re-install k9 web protection will simply get you a new license code and a new password you can enter without the need of old password.
1.Open K9 web protection website 2.Click "get K9 NOW" tab on the top-left 3.Fill out the information and your email. 4.Download the K9 Web protection software from the link included in the email and keep a copy of the license. 5.Grab a version of the K9 web protection installed on your computer, a Google search should do the job. 6.Open "Task Manager" by press (Ctrl+Alt+Delete) and end the process K9filter found in the "Process" tab. 7.Now, you can safely delete the K9 web protection program files. Open computer explorer and go to the folder where K9 is originally installed. It can be found mostly at C:\Program Files/Blue Coat k9 Web Protection. 8.Remove the contents of the folder but not the folder. 9.Run the K9 web protection setup/installer file which has the same version as the one you just delete 10.Provide the license and create your new password 11.Point the installation folder to the same folder you just empty the contents earlier on 12.Now you can have a re-installed K9 web protection with a password you know. How do you uninstall K9 web protection now? Use the new password you just created If something goes wrong, install the K9 web protection program downloaded from Step 4.
Method 2
Reboot Windows into safe mode: restart your computer and hold "F8? key until you see the menu to choose "Safe Mode" Login to windows and go to "Program Files" directory and delete the K9 folder manually (delete only the contents but leave the folder) Click "Start"->"Run" and type "msconfig" Check the tab "Services" and tab "Startup" Un-check anything that is related to k9 If somehow this method is messed up, try to download K9 again to at least restore your previous installation. If this still does not work, try to install Revo Uninstaller.
Here is a video tutorial

get new batt for the remote, it is almost dead.

Your best bet for this would be to go to the Omega website. Be sure you ahve your make and model number of the alarm. Good luck and please rate. Use the link below to retrieve your manual.

www.caralarm.com/manuals.asp

Try to reprogram the remotes to the alarm. Have your vehicle key and both remotes ready. The way to do this is as follows:

1. Turn ignition key to run position.
2. Within ten seconds push the valet button 5 times.
3. The siren will give a chirp, indicating that you are in programming mode.
4. Press the large button on the first remote. A chirp will be given as confirmation.
5. Press the large button on the second remote. A chirp will be given as confirmation.
6. Turn off ignition and remove key. Alarm will give long chirp indicating exiting program.
7. Try remotes. Both should be working.

For the next 48 hours, every time the vehicle is starting the siren will chirp indicating that remotes have been programmed. After 48 hours this feature will turn itself off. Also keep an eye on the alarm light as it will also blink the number of times as remotes are programmed every time the ignition is turn on.

Hope this information helps. Please rate. Thank you.

turn key to on position, push valet 5 times then alarm will chirp then hit the lock button on remote

Yes, there is a technical way to disable K9

1. Go to K9's Web site, and download a copy of K9 -& get a new license
2. Go to your Program files on your hardrive, and delete the FILES that are in the K9 Folder.
3. Empty your recycle bin
4. Reinstall K9, enter a new password, complete install program
5. That is it! -you can now uninstall K9 or set it accordingly

Just some advice from someone in the same situation!

Contact K9 directly and ask them if they could send you a user manual.