Toshiba tecra M2 LCD Screen

if is outside the screen, just an lcd cleaner can take of it.
if is inside the screen, a few small black dot is an "acceptable defect".... if so, there is no way to fix that besides to replace the screen

hi friend

Press F8 Just after you press the power button.
a window will open select safe-mode use the arrow keys to select and hit enter .then safely restore the computer using system restore.or uninstall the graphics Driver from control panel.the drivers that you were going to install was digitally signed?
this thing usually happens when you install an unsigned driver . click her to know hot to use system restore

please rate me

computer on but screen is blank

you need to run a program like SPINRITE.EXE . you can dl online from a torrent site. it will fix your problems.

Most possible one of your Toshiba Tecra m4 driver is not working properly, but don't worry give me a call at +1 (833) 493-0111 so that i can suggest you the right way to fix it!

I would look on ebay for a smashed one first.
or one with a malfunctioning screen. When I did an e-bay search for your model It came back with 509 results. The bottom link is a repair specialist for that kind of notebook.
Tecra-M4-S435-Tablet-PC-Laptop_W0QQitemZ160335072304QQcmdZViewItemQQptZLaptops_Nov05?hash=item2554b70c30&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50">http://cgi.ebay.com/Toshiba-Tecra-M4-S435-Tablet-PC-Laptop_W0QQitemZ160335072304QQcmdZViewItemQQptZLaptops_Nov05?hash=item2554b70c30&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

Tecra-M4-M7_W0QQitemZ260411761192QQcmdZViewItemQQptZUS_Gift_Certificates?hash=item3ca1c02228&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50">http://cgi.ebay.com/LCD-Repair-TOSHIBA-Tecra-M4-M7_W0QQitemZ260411761192QQcmdZViewItemQQptZUS_Gift_Certificates?hash=item3ca1c02228&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

You have to remove the screw covers (the black squares around the screen), remove the screws and gentley pry the cover open with yor finger nails or a flat head screw driver, but be careful not to dent the sides with the screw driver. You can then take a can of air and blow the dust out. I would not touch the sensetive screen under neath. You could take a anti static, micro fiber cloth to wipe off the tough stuff.

mine does the samething have you found out what the problems is yet?

reset the cmos battery in 30 minutes

nothing happen when you press power? and when you plug energy no led?