What is a USB 2.0 MSD mode? - SanDisk Sansa e260 MP3 Player

go to settings , change usb mode. mtp to msd or msd to mtp. it should work.

To change to MSC, Scroll to settings, scroll down to USB Mode, and choose MSC. You should be good

Go to setting and go to USB then go to msd mode.

if you go into the setting section of the menu you can select the USB mode back again, if this fails to solve the problem, take the back of the player off via 4 very small phillips screws and remove the battery for at least 30 seconds then put it back in and it should be good.

The usb2.0 is the connector for usb on most computers.
It's the fastest usb drive to this date!

Go under menu, settings and click on usb mode..
there should msc mode and thats what you want it to be
I hope that helps
Please rate accordingly
Computerrep

switch to mtp mode or auto in the menu - read your manual for details, and see if you have better luck

You need a memory card.


sincerely, Britani

Magnosta,

On the e250, from the main menu, select Settings, then there should be a selection for USB Mode. From there, you can select either MTP mode or MSC mode, which I think is what you meant. See if that helps.

Maddogeleven

The MEMORY was lost? ie: Did you physically lose 2/4/6 Gb of usable memory or did you lose the FILES in memory?? I would go to the SanDisk site and download the latest firmware update. Also be sure that you are using a "high power" USB port (USB 2.0 usually) and that the player's USB setting is set to MTP mode.