Pioneer VSX-4900S Receiver Connections

Just buy a replacement remote made for the device.

Remote Control - Pioneer VSX-1019AH Operating Instructions ...

www.manualslib.com > manual > Pioneer-Vsx-1019ah

Pioneer VSX-1019AH Manual Online: Remote Control. RECEIVER 1 DVD BD TV CD 2 iPod USB TUNER INPUT SELECT 1 SIGNAL SEL MCACC 4 3 SBch 7 ...

remote Control For Pioneer VSX-1019AH-K VSX ... - eBay

www.ebay.ca > ... > Remote Controls

Find many great new & used options and get the best deals for remote Control For Pioneer VSX-1019AH-K VSX-919AH-K VSX-01TXH A/V AV Receiver at the ...

Generic Remote Control Fit for VSX-1019AH-K ... - Amazon.com

www.amazon.com > VSX-1019AH-K-VSX-1019AHK-...

Buy Generic Remote Control Fit for VSX-1019AH-K VSX-1019AHK VSX-522-K AXD7536 7.1-Channel for Pioneer AV A/V Receiver System: Remote Controls ...

These receivers have a history of having broken connections on the subwoofer jack. Would have to go in for repairs.

Hello
Try to download the user manual to Pioneer VSX & THX user manual. click here to down load the same. You will get details of it connections from the manual.
http://www.dataentryjobs.us/67948.html

Try resetting the receiver the Pioneer Web site should have the reset procedure for your model if that doesn't work time to send to the shop.

my epb fiber optics remote wont program my ilo tv set, the installers were able to make it work, the remote had to be replaced and i cant program it

Hmmm, that almost sounds like a bad solder. As things heat up, they expand. When there is a bad solder (even if you can't see it) as the unit heats up and the pieces expand, the contacts at the solder point will meet and allow the circuit to complete, thus producing sound through the right channel.

Take a large magnifying glass, and with it, examine the bottom side of each of the circuit boards, looking for a solder point that is not well formed.

Hello,
The subwoofer is totally independent from your Pioneer VSX-D412. You can check if it works like you did with a finger on the hot point of the RCA cable (not very good test, as you will hear noise and can't say if that means it works OK) or better connect a known receiver to the speaker connections in the sub and test to see if it’s working properly.
Regarding the receiver, you may not have enabled the VSX to output to the sub. Read the manual on how to check for that. Only Dolby Digital 5.1 signals will allow the sub out, in a receiver of this level. It normally will not let you use the sub in stereo mode. Some more complex units will allow you that, but I believe not this model.
Good luck

ANY NEW universal REMOTE MADE 1984-2001

is the square button also labled as down arrow button, push the down arrow button and will give access to the lcd screen setup options on the receiver center speaker size lfe att settings cross over rear channel size ect. i don't have the manual either took me a year to fix the issue.