Zanussi FLE1416W Front Loader

Unplug machine and wait a few minutes and replug it in again! This usually resets the computer on the washer but be prepared if it happens on a regular basis you may need to call a qualified repairman that can troubleshoot the problem!

Have you selected a program?

I hope I have been of help but please do not hesitate to ask if you have any further questions.
I appreciate your vote if you appreciate my reply.

Make sure that the front door is locked or that the door switch is contacting to give the feedback signal to the main circuit board. This is a safety feature of the washer because unless the front switch works - door shut-the washer will not work - no action on start/pause.
Replace if the switch is faulty.

I have had a similar problem for many years. It appears at random and seems to go away if you leave it for a while (anything up to 24 hours). I have taken the machine apart and have failed to find any physical reason (blocked pipe, jammed pump etc.). However, patience prevails. Even if you try to start the programme loads of times it seems to make no difference. I've not yet found a fix and the machine is really good when it is working so I have learned to live with it. If anyone has a fix I'd be interested.

Check start delay time ( if your machine has one ) , If any time is set on this the machine will not start untill that time has elapsed or is cancelled.

Hi,

i have just fitted a new pump to my Zanussi FLE 1416w washer, the main power light is on but the start button does not light up.

Can you help.

initially i would replaced the door interlock then if no result the control boart could be faulty.

Try door interlock

try replacing the door interlock first

The error message "Err" usually indicates that the wash program and option are not compatible. 40 degrees and 900 rpm Spin should be o.k.. I would try another wash program with no special options and see if the problem goes away.