WATER IS POURING OUT FRONT BOTTOM OF WASHER. CHECKED HOSES, ALL ARE TIGHT, NOT LEAKING FROM THERE. WATER COMING FROM EACH FRONT CORNER. THANK YOU!
Hey guys and girls. I found the problem the soap dispenser tube popped out of the gasket and was leaking behind the gasket and running down the front. It was pretty easy to take apart the unit. I can also offer this tip. Cut the hose off of the soap dispenser piece.
Pull the tube through the hole in the gasket and reinstall the soap dispenser and carefully pull the hose back to re-seat the soap dispenser.
Check your door boot, ours is doing the same thing. Found out there's a huge hole in the door boot seal.
Try onscrewing top panel on machine...when machine agitaes strongly a hose my pop lose up from top.
1,172 views
Usually answered in minutes!
I hate this washer.
Have a ge washer that leaks out the front. It acts like the seal is not sealing with the door. Model no. wbvh6240fww
the rubber sealant has tear in it
Our 5 yr old whirlpool washer had water filled in the drip pan, over flowed and seep through floor board. We have a dry wall mess now on the second floor. QUESTION: Obviously the drip pan is there for a reason, ours had separated from the drain pipe it was connected to. Would normal "drippage" cause that much over flow???
×