At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
What do we do with a clean unable 50 message on our Brother DCP-130C printer.
Does it have anything to do with the encoder strip if so where to i find it?
It had a paper jam before but when we removed the paper it had clean unable 50 message. We have checked and blow dryed the printer to remove any left over material.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
on my DCP 130C display appear an errore message "imp. stamp 50". This is an error message in italian language that indicate impossible to print, error 50.
Please, have you some suggestion to resolve this problem?
Thansk in advance
Clean unable 46 means you need a new flushing box. It's where the ink goes when it cleans the printhead, and yours is full. You need a shop to replace it.
The encoder strip switched off the ph and has to be set into place again. see here how to fix it: http://www.fixya.com/support/t211210-brother_mfc845cw
(enlarge the browser window to see pics somewhat better)
An advice: when you have set the encoder strip in pos. again stick some scotch tape on the top of the ph cover where the strip runs thru to prevend the slipping off again on next paper jam ;-)
- pull out the AC plug - put back the AC plug while holding down the "menu" button and keep holding it (15 sec) - now you are entering the MAINTENANCE mode and "error 46" pops up in the display - select 8 by using the arrow buttons ,push OK and select 0 and push OK - 00:00 00:01 OK (the display is showing this message) - now push the MONO button 25 times until you see PURGE: xxxxx - Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok - the purge counter indicates now: purge: 00000 - switch off the printer ,switch it on - ready to print
i have the same problem on my dcp-j125 printer. please help.
×