Where can I get a user manual for Toshiba 1360 black & white copier?

open the machine and lift the red fuser cover and check the exit sensor make sure that that the flag moves easly then makr sure the registration sensor flag moves easy as well the sensor is located at the black roller in the bottom of the machine there is a cutout in the plate you should be able to see the flag if not it is stuck in the open position the figure 8 is a paper jam error

With the unit off hold down clear/stop and 8, ad should apear push 89 start (display will read 03) then 0 start. tis should fix it. -Carl

here is a link to the owners manual link

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

.send me your mail
i'll send em for you
[email protected]

Hello sir; No photoconductor can be reset,even toshiba copier.

you need service technicien to maintenance your copier, because it is full with used toner.

"C7" Faulty thermistor, thermal fuse, or heater element

Check the corona wires.

TOSHIBA 1310 C7 Fusing unit warm-up error, defective thermistor, fusing lamp or thermofuse

 

The codes are good for several models.

You should be able to retrieve a code for a malfunction by pressing down the clear/stop and 8 keys. then let me know what you get, and we will go from there.