Batterys went dead in remote put in fresh

TRY FRESH HIT BATTERIES FIRST!
I WAS ABOUT TO ORDER A NEW REMOTE, then read this thread. I went back and messed around with the remote. I checked the batteries and the had power but wee in the low yellow reading. I put in fresh hot new ones BOOM it was working just fine.
Thanks for all y'allZ commits.
Sam B.

Fresh batteries in remote? Will AC turn on by manually at ceiling assembly? Little green or red light on at ceiling assy? Have you checked Carrier site for manual to download?

if it is a mini split you have to set date and time on remote before unit will work remove batteries from remote and start over

Hi, try to change the battery's that can be the reason for it to not work.

Muzzi_123

Fiend your solution direct from nintendo. Here is your solution....


http://www.nintendo.com/wiiconsole/prob676ijt65/solution

aqrtyctr-69

We hotwired the thermostat wires and the furnace started. That told us that the problem was with the thermostat. We took our remote control to another camper like ours and our remote worked their furnace. That told us that the problem was in the ceiling control for the furnace/ac. But the man who owned the other camper told us that he had a problem, too, and was told to unplug all the electric including the battery, wait 2 minutes, and hook up again. This might reprogram the circuitboard, and voila! It worked.

I had the same problem. I fixed it by turning off the battery switch to disconnect the battery from the power panel. I then had to turn off the main 110 breakers to shut down the converter. Once all the power was turned off the LED light went off. When I turned the power back on the remote was working fine. Hope this works for you.

i would suggest that you look at your thermostat,it may be to close to the furnace keeping in mind that all thermostats have a certain tempreture drop (or gain) before restarting john