Got a new Vista computer and cannot get Kodak EasyShare Printer Dock Series 3 working. The computer searches for drivers but says can't find driver for "Xerox DocuPrint N17" That is not even the printer. I tried a new driver from Kodak but no luck. Any ideas?

Kodak EasyShare Z650 zoom digital cameraUser guide

Battery charging options Visit www.kodak.com/go/z650accessories for:
Kodak EasyShare camera dock series 3 - powers your camera, transfers pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak EasyShare printer dock series 3 - powers your camera, makes 4 x 6-in. (10 x 15 cm) prints with or without a computer, transfers pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.
Kodak 3-volt AC adapter - powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock or printer dock to power your camera.

The manual for a Kodak EasyShare printer dock series 3 can be found here: http://resources.kodak.com/support/pdf/en/manuals/urg00367/PD3_GLB_en.pdf

Hello, try this and let me know.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

Hello,

one way or the other, someone must have change some settings on the Kodak EasyShare printer unknowing to you.

Since you do not know want was pressed to have caused this, the it would be better if you reset the printer. resetting will put the printer back to its default state. This will make the printer work fine as it has been doing before.

Or uninstall and reinstall the printer drivers. That is, detach the printer cord from your computer, uninstall the Kodak EasyShare printer dock Series 3 software, restart your computer and reinstall the software back just as you did when you first installed the printer to your computer.

This will help to rectify this problem.

Good luck.

Hi lomls3,
Are you using Kodak Easyshare ver8? If not, you may need to update the software in order for Vista to send the print jobs to the Kodak G600 printer.
Update the software to ver 8 first. Reboot the computer and retry printing.
Ver 8 can be downloaded here: http://www.opendrivers.com/driver/293165/kodak-digital-camera-kodak-easyshare-software-update-8.0-windows-2000-xp-vista-win7-free-download.html
Hope this helps.
Andrew

Click here, its a link to kodak's easyshare printer dock 6000 exactly at the driver download.

follow the link below for xp drivers
http://www.kodak.com/global/en/service/downloads/dln_ekn030179.jhtml?pq-path=6638/6639
Mark

Did you put the camera on top of the docking station?

connectivity, connectivity
Is it connected to the \PC?
is the cord connected
is there damage to any cords?
Are the drivers installed for the printer dock/and Camera

check your usb drivers on the PC if they don't work you may need to upload new PC drivers, and cam/dock drivers

do you have permissions to add hardware to your PC
Win2k-XPP-etc

make sure the external card is activated, and make sure the pics reside on your pc, if you are trying to transport directly from an outside web source to the camera you'll just be confusing the computer. It may have worked at one time (luckily I may add) but by now the drivers are so corrupt that the process has fallen null. Otherwise reinstall the dock drivers to transfer the pics from a safe place on your PC to your Camera only. Good Luck!