I would like to clean my Dyson DCO7. I have lost

clck this link for instructions how to unblock the tube in your dc07 you can also use broom handle
http://www.youtube.com/watch?v=US78z540kFw

Hi there,

For information on using and maintaining your DC04, please refer to our Support page for this machine - just select the model you own from the list:

http://support.dyson.co.uk/Support/Uprights.aspx

I hope this helps - if you'd like any further assistance or advice, please call us free on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

On the page which opens, click on the "Download" button to download and save the manual.

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

Hi its Darran at Dyson.

We would not recommend that you take the cyclone top apart. This part is designed to be a sealed unit and taking it apart may affect ther performance of your machine ongoing.

If you are concerned with the performance of your machine, please follow the blockage procedure and filter washing instructions on our website in the support section at www.dyson.com or check your user guide.

If you do want to clear dust and debris from the cyclone, we recommend that you simply hold the cyclone top over a bin and bang the sides gently to remove any dust from the inside.

Kind regards
Darran
Dyson Customer Service

Yes. There's a blockage somewhere which is restricting the airflow. Follow instructions in the User Manual (you can download one from the Dyson website if necessary) for clearing blockages. Also make sure the washable filter is clean (and don't put it back until it's completely dry - at least 24 hours in a warm place). Good luck!

This is a sure sign of a blockage. The motor cuts out because it gets too hot and will start again when it has cooled. Follow the instructions in your user manual for clearing blockages (you can download a copy from the Dyson website if necessary). Make sure the washable filter is clean too (and completely dry before you use it).

you can order the originals from the warranty station here Dyson Repairs

Hiyas
use this link http://www.dyson.com/customercare/manuals/us/dc07_opmanual_usa.pdf
and it will take you to your manual, save it to your desktop or print it off, im assuming its the DCO7, if not go to www.dyson.co.uk and they have downloadable manuals for you there

This suggests that the bristles on your brush roller are worn out.  When the bristles are a good working length, rotation of the roller actually helps to pull the machine over the carpet. When the bristles wear down this effect is lost.

u can wash them out