Canon powershot sd750

Hi,

If this is the case, the camera might have internal damage. Might be better to send it back to Canon delears/shop for repair. Please try below link

Canon

Take the battery out of the camera, put it into the supplied charger, and plug the charger into a wall outlet.

Move top selector all the way to right,

1.put in auto mode
2. Hit Function set button
3. Where it lets use choose sizefrom L, M1, M2...scroll to Post Card 1600x 1200
4. hit function set again
5. Hit Menu, now you can select time date stamp
6. took me awhile to figure it out

Get an estimate of the repair cost and then decide whether to get a new one or not.

somebody saying under warranty

http://www.digitalcamera-hq.com/digital-cameras/canon-powershot-a570is_question.html?qid=12688

Canon U.S.A: SupportEXE, Canon PCL v5e Print Driver v5.10 INF File for Windows NT 4.0 (WHQL Certified) NOTE: Please read INSTALLV53.PDF (Found in this section) for installation ...
www.usa.canon.com/html/download/imagerunner5000.html

PSRemote - Canon PowerShot Remote Capture Camera Software
The leading application for controlling Canon PowerShot cameras from a Windows PC. It gives a high degree of control over the camera and includes a live ...
www.breezesys.com/PSRemote/index.htm

For those interested... It is possible to use a Powershot camera as a webcam thou it requires 2 softwares:

1)PSremote
2)Softcam

Basically I used psremote to create a viewfinder on the screen and den use Softcam as a virtual video capture device to capture the image on the "viewfinder".

I tried and tested on MSN and it works.

For software or more indepth instructions, feel free to email me at [email protected] with the subject "Powershot Webcam".

Here ya go straight from the Canon website. Select the "Drivers and Downloads" tab to find and download the software that you're looking for:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=224&modelid=14919#DownloadDetailAct

Hello hello,

I found mine at the canon site....
for you, it would be here...
http://software.canon-europe.com/products/0010438.asp

good luck, duders!
Wayne

take a look here for your MAC updater
http://software.canon-europe.com/products/0010438.asp

GoodLuck
Wayne

My Canon Powershot SD750 Elph..
The Date Stamp is grayed out so I can't turn it on. Have any advise on how to get this to work?
Thanks.