Question about Kenmore HE2 Plus Front Load Washer

5 Answers

Kenmore HE2t washer - error code 5d

I have a Kenmore HE2t Front loading washer. After each cycle an error code of 5d is shown on the display. What does this error code mean?

Posted by on

  • Anonymous Mar 22, 2014

    Code 50 on kenmore front load washer

  • lesB Jun 07, 2014

    There is an answer here on Fixyahttp://www.fixya.com/support/t3580503-ke...

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

5d is a definitely a the code for a plugged discharge. We removed the lower access panel and discovered a virtual treasure: $12.50 in quarters, nickels, dimes and pennies, a pen, a pencil, collar stays, 10 bobby-pins, 3 barrettes, a elastic headband, a draw string, a box cutter, 3 washers, 3 broken zipper parts, a elastic waist band. Amazing it took all to trigger a 5d error code. Hope this helps!

Posted on Apr 03, 2010

  • Constance Rogers May 04, 2013

    Thank you for the example, I see others have done the same thing and found success. I also took note of the suggestion of too much soap. We are looking at a used set for 350. or less with the dryer gas for my son. Either is a simple solution we can handle. Yeah! What did we do before the internet. You can investigate anything!

  • Vic Barc
    Vic Barc Sep 03, 2015

    this is just part of problem. 5d means sd which means too much soap. See comments coming from sears.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

5d is a code for drainage problem. I took the lower front panel off and removed the cover for the drainage filter. There was a quarter and a couple of other things in there,... Once removed, everything worked fine.

Posted on Dec 06, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It is not a 5d code, it is Sd for Suds. You are using to much detergent or are not using HE laundry detergent. Please see this site for reference.
http://www.applianceblog.com/mainforums/sears-kenmore/10283-he2-error-codes.html

Posted on Sep 06, 2010

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Wat eror 40

Posted on Jan 15, 2013

  • zdravko ynkov Jan 15, 2013

    wat eror 40 AEG 72640

×

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

No solution to this just want to no what i can do to fix it???? do i need to take the drain cover off an see if there is stuff in there or do i have to call some one to come look at it really dont want to do that can do it my self with a lil helf. if any one can help with this prob u can reach me at senblk1@hotmail.com reply kenmore an if u do thank u sooo much

Posted on Sep 18, 2012

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Macmarkus

Mark MacDonald

  • 2605 Answers

SOURCE: Just received error code 5D

Hello, welcome to fixya.

Based on your post I understand you have a "SD" error problem (looks like a 5D in the digital display) with a Kenmore washer, the error means an excessive drain time or excessive suds was detected as you may or may not already know.

If you follow the link to my solution to this error designed specifically for "do-it-yourselfers" you should be fixed up in no time. (It's much quicker for me than pasting or retyping the complete solution several hundred times, that's how common this is)

http://www.fixya.com/support/r9090359-whirlpool_frontload_f2_f21_sd_suds

Thank you for visiting fixya for your washer inquiry. Please take a moment to rate my assistance both here and on my tip link and leave a brief testimony.

Regards,

Macmarkus :)

Posted on Jun 26, 2011

jsrock516

Jeff Rockwell

  • 5911 Answers

SOURCE: I have a Kenmore HE2T error code F24

The "F24" error code is a heat sensor error code. The following link explains the error code in detail and the steps to correct it:

http://www.fixya.com/support/r1976126-f24_error_code_whirlpool_duet_kenmore

In many cases, the connector plug on the NTC sensor wiggles loose and causes the error code. Check the NTC connection first to make sure it is tight and making good contact. This may save you a service call and/or replacement parts. Make sure you UNPLUG the washer before servicing anything inside the unit.

A replacement NTC module (if required) can be purchased at searspartsdirect.com for about $10. Refer to the parts illustrations under the "Tub and Basket Parts" heading.

If you have any questions, please let me know. I hope this helps you.

NOTE: Each washer comes with a technical data sheet located inside the cabinet. You will need to remove the lower toe panel directly below the door to access it. If it is not located directly behind the panel, it will be affixed to one of the interior cabinet walls. The tech sheet includes all troubleshooting tips, wiring diagrams and fault codes with explanations.

Posted on Dec 09, 2009

Krazytech

Franklin Ouchida

  • 725 Answers

SOURCE: kenmore he2t error code 21

F21 is a long drain...it is taking too long to drain..you have a something slowing down the drain.. you can remove the bottom panel and clean out coin trap... if there is nothing then you may have another problem... but this is the most common problem..

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


what's f24 code? - Kenmore Elite HE3 Washing Machine ...

https://www.ifixit.com/Answers/View/85549/what's+f24+code

iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

F24 Error Code on My Kenmore Washer ' eHow

www.ehow.com > Home
F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

Kenmore HE2 Plus Front Load Washer F24 error code ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

I have a Kenmore HE2T error code F24 - Fixya

www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
Dec 9, 2009 - Posted on Dec 09, 2009.

Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

My Kenmore HE2t washer is stopping about 8 minutes into the cycle (any wash cycle)..completely turns off. I can run rinse and spin then and it completes the cycle. No error codes when it turns off. W


htc sensor isnt working i would recon
perhaps the element isnt getting power
did it trip your circuit breaker
some times the htc fails
all you get is machine stop because the heater is not detected

if it spins rinses and empties in a timely manner
then all thats left is the heater system

Jan 09, 2015 | Kenmore HE2t 3.7 cu. ft. Front Load Washer

1 Answer

I have a Kenmore HE2t i keep getting error f21 i cleaned the trap and it still does it


You may have to unplug it for about 15 minutes and try again. I had a similar problem and this helped.

Mar 19, 2014 | Kenmore HE2t 3.7 cu. ft. Front Load Washer

1 Answer

Every time I start my Kenmore HE2t washer there is


If it has a clean cycle that says, "Bleach Only," run it with 1/2 cup bleach right in the machine. If not, run it on the longest, hottest cycle you have. In the future, leave the door open slightly between loads.

Oct 29, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore he2t error code 21


F21 is a long drain...it is taking too long to drain..you have a something slowing down the drain.. you can remove the bottom panel and clean out coin trap... if there is nothing then you may have another problem... but this is the most common problem..

Sep 23, 2009 | Kenmore Washing Machines

1 Answer

Keep getting error code sd or 5d and sometimes a F error on my HE 2plus washer. Is there an inexpensive solution to the problem or should we be shopping for a new washer?


Hi

The Sd or 5d indicates that excessive suds are detected by the washer during the drain or spin phases of the cycle. The washer will stop and fill with 4 liters of water and then wait for 5 minutes to allow the suds to dissipate before continuing. If the suds cannot be reduced or eliminated so that the washer cycle can continue, it may stop and display the F21 (long drain) fault code. After the suds dissipate, you can normally drain the washer and spin out the clothes using a RINSE/DRAIN & SPIN cycle. Make sure that you are using HE (High Efficiency) detergent in the appropriate amounts to prevent excessive suds in the washer. This should prevent the washer from going into this routine.

And if you still face the same error then probably there is something(coins, socks, dirt, debris, etc) stuck inside the drain filter of your washer. You'll need to check the drain filter. To access the drain filter. To check the drain pump follow these steps:
  1. Unplug the washer to completely disconnect electrical power.
  2. Remove the bottom front service panel as shown in the first image below.
Also check your drain hose for a kink or clog. Check the washer house drain for a clog or restriction. Test the washer to see if it will drain properly.

Also refer to these diagrams for more details--

Kenmore Drain filter and pump link1

Kenmore Drain filter and pump link2

Please do rate this solution and revert for further assistance.

Thanks
Rylee

Jul 13, 2009 | Kenmore HE2 Plus Front Load Washer

2 Answers

Kenmore front load HE2 plus


I have a F01 error message on my Kenmore He2t washer. I tried to add clothes to a wash and restart and continue to get the message. Please help

Jun 14, 2008 | Kenmore 46462 Front Load Washer

2 Answers

2006 kenmore smartwash quietpak4 he3t F20 code washer


F20 ERROR CODE ON A KENMORE HE2T FRONT LOAD WASHER.THE FIX FOR ME WAS TO REPLACE THE TUBE THAT RUNS FROM THE PRESSURE SWITCH TO THE BOTTOM OF THE WASHER.YOU MUST REMOVE THE TOP AND BACK COVERS OF THE MACHINE(EASY).REPLACED TUBE WITH3/16 INCH CLEAR TUBE.THE ORINGINAL TUBE HAD A PIN HOLE FROM RUBBING AGINST THE SIDE OF THE MACHINE AFTER 5 YEARS OF USE.THIS COST UNDER $10 DOLLARS TO FIX. NO SERVICE GUY=MORE BEER MONEY GOOD LUCK.

Nov 07, 2007 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

28,171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...