My sandisk sansa e200 mp3 player won't show good on the screen

Hello, kindly get it here : www.sandisk.com/sandisk-support/driver-download-wizard
www.givemefile.net > ... > Audio > Audio player > MP3 Flash-player

Regards, jaay__GT

Try this instead:
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/Retail/DriverDownloads.aspx
-Tha Mp3 Doctor

1-866-726-3475 Sandisk Customer Support

www.sandisk.com

click on support at the top; click on MP3 players,
find your Sansa and click on it there’s a lot of info

check ebay you will find it there
go to mp3 covers on ebay
richard from chicago

Probably not. Open a ticket with the sandisk.com support and see if you can get it replaced if it's under warranty. you may have to call because they are kinda slow at getting to the tickets.

Thank you and please respond with any comments or more questions.

-John-

Hi, When i connect my sansa e200 mp3 player with my computer..it showing CONNECTED on the mp3 player screen, but does not show any disk drive in my computer. No problem with computer, my pen drive is working fine with it. can someone help?

Must replace - lcd is cracked

You may have uploaded the incorrect or have had unstable power connected to your Sansa E200 when updating. If that is so, your Sansa E200 has been bricked and it's useless. This is the correct Sansa E200 Firmware Updater, "http://www.sandisk.com/Retail/Default.aspx?CatID=1376" (Note: Sandisk is Sansa)

how do i fix it

I am having problems with my sansa e200 the memory will not show up on it. any help would be greatly appreeciated.