Dryers Logo

Related Topics:

Posted on Dec 03, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a kitchen aid superbra electric double

I have a kitchen aid superba electric double oven(KEBS278DBS10). The bottom door does not close all the way and the light stays on. I am trying to find out if it is just a worn pin or if the entire mechanism needs to be replace?

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,891 Answers
  • Posted on Dec 03, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 20, 2009
Answers
1891
Questions
0
Helped
409359
Points
5205

Replace the left & right hinges ( if stainless door they have stronger hinges for this.. this is a very comm problem .. in some model you can use shim kit for this problem but replacing hinges is best avenue . mm

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Kitchen Aid Superba double oven

f5e1 is a door locking error. try shutting off power for a minimum of 2 minutes to reset the control board. If you still get the error replace the latch. Here is the part to order.
3helpful
2answers

Kitchen Aid Oven - Superba Selectra- receive

Hi,

Here is what Kitchen Aid says about F4:

F4 Meat probe shorted
1. Disconnect meat probe and measure probe resistance (78kω at 60° F [15.6° C],
37kω at 90° F [32.2° C]).
2. If resistance is not valid replace probe.
3. Insert probe and check for a firm connection between probe and jack (in oven cavity).
4. Check connection between jack and harness (in rear of oven).

It sounds like the probe jack may be bad or the wiring between the jack and the control board above.
0helpful
1answer

Kitchen aid double convection oven - glass needs cleaning!

Had to remove the screws on the BOTTOM of the outside door, then panel came off after all the screws (inside oven door included) were off...
Reversed the order to put back on.. Cleaned (all) three glass pieces nicely... Now after reading the problems with the self cleaning part (doors getting stuck!) - I'm afraid to try mine!
0helpful
1answer

Kitchen Aid microwave door -- outer glass

Lisa, I do not have a solution, but have the same problem. My KA superba micro has been used about 10 times. While it was off, and while no one was home, the outer glass in the door shattered. I suspect this may be a defect.
11helpful
2answers

Kitchen Aid Superba Double Oven

Remove the oven from the wall. Remove the rear panel.
The upper and lower ovens have a non-resettable thermal fuse that has blown.
Use a VOM to verify which fuse. After repair use Easy Off, not self clean.
0helpful
1answer

Kitchen Aid Double Convection Oven blows circuit breaker

the kehc359jss mircowave won't start, it says "door" on the display but the door is closed.
12helpful
3answers

Kitchenaid Superba microwave oven combo close door error

turn off the main power outlet it will work.
Feb 09, 2009 • Ovens
0helpful
1answer

Kitchen Aid superba (electric oven)

you will need electrical meter. Take unit out of hole remove back plate( unplug or turn breaker off first). Turn power back on set temp for bake check leads to element. If no voltage replace control
0helpful
1answer

Looking for a part KitchenAid DBL Convetion oven (12 years old)

Are you talking about the oven pan at the bottom of the oven? If so, the part number may be 1059318 and costs about $50. You can find parts for your range at repairclinic.com. Just type in your model number in the search window. There is an extensive pictorial part index with price infomration. Unfortunately, this part did not have a photo with it.
Not finding what you are looking for?

107 views

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...