Vista software driver for usb cable

A letter from Altec: E-mail from Altec Lansing explaining how to use the ACS 495 speakers with Windows XP and Vista: "These speakers require no special drivers or software to work properly. At the current time we do not have AMS software or an USB audio device driver compatible with Windows XP or Vista. There are no plans at this time to develop this software. Your speakers will work with Windows XP & Vista. Just make sure you use the audio cable from the back of the subwoofer to the audio or sound out port of your sound card. Do not use the USB cable. Sound does not come through the USB port The USB cable just allows you to use the AMS software. This software gives you some control over some of the sound features. The same functionality of the AMS software can be gotten by using the buttons on the speakers and the volume control software that comes with your Windows system. If you double click the speaker icon from the system tray, that will open this software up. With the USB connector removed or the computer turned off, STEREO or PRO LOGIC modes can be selected by depressing and holding the center control down for approximately three seconds. The mode selected will be indicated by the color of the LED on the front right speaker. When the light glows yellow it is in the STEREO mode. When the light is green it is in the PRO LOGIC mode."

You can get the software at link below for vista.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&dlc=en&product=374568


Good luck

Don't believe it's a driver problem since Vista has a USB driver incorporated. You may need to buy the Vista version of this software. The XP version doesn't work with Vista.

Check these HP FAQS:

• 'An error occurred while communicating with scanning device' Message Displays in Windows XP When the Device is Connected to the Computer with a USB Cable (Windows XP)
• In Windows Vista the message 'An error occurred while communicating with scanning device' Displays When Scanning with a USB Connected Printer (Windows Vista)

If you have Windows Vista, and the FAQ above doesn't solve your problem, you might need to update your driver/software. Read this:
Installing the Product Software in Windows Vista for a USB Cable Connection

the drivers *must* be for Win Vista - not XP.

gurutim

Try to download the Vista driver and install it. To download the driver, please click on this link below:

Lexmark X4270 Vista driver

Thank you

Hi Duff


Follow these steps to resolve:
· Disconnect your USB cable from your printer.
· Uninstall all Lexmark printer drivers on your PC.
· Download the correct Vista driver for your model.
· Install the driver on your PC.

Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.

Alternative driver download link: HP PSC 1315 All-in-One Printer Driver

Fond this on the Lexmark Website. Hope it helps.

Attention Windows Vista Users
If you have installed your printer on your PC using an original Lexmark Driver CD that came with your product and you are experiencing problems when printing, you may have installed the Windows XP driver.

Follow these steps to resolve:
· 1) Disconnect your USB cable from your printer.
· 2) Uninstall all Lexmark printer drivers on your PC.
· 3) Download the correct Vista driver for your model.
· 4) While leaving the USB unconnected, Install the driver on your PC.

Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.

hi,

have u downloaded and installed the latest drivers for this printer in order to install it in windows vista? if not u can get it from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-47558-1&lc=en&cc=us&lang=en&os=2093&product=1156652&dlc=en

before installing the new drivers and softwares for this printer

> uninstall all the softwares and drivers from your computer
> unplug the usb cable
> run the downloaded application
> when the applicatinon asks you to plug the usb cable, insert it.

thats it!!!

thanks and regards
agnel