Cant get the talking caller Id

I wouldn't have thought a television accepted phone calls. A model number would have solved for sure. 'make model manual'.

Two conflicting answers. First one 'yes and how to', and the second 'Sony Bravia doesn't have Caller ID'.

the MENU button on your remote, selecting the Settings tile, scrolling down, and then selecting Caller ID Settings.Mar 1, 2015

Viewing a thread - Sony Bravia...smart tv & telephone caller i.d.?

https://talk.newagtalk.com > forums > thread-view > Displ...

Caller ID - Sony Community

https://us.community.sony.com > question > caller-id
Dec 26, 2015 - SONY Bravia TVs doesn't have Caller ID features.

The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

hi found a link to a user manual, its very hard to read it, very small writing and not to clear but got basics of phone working, still need to find a hard copy of user manual thx

You have to press "Menu" "#" then 1 6 2.
You can also just press menu and then scroll to talking caller id, select it and then choose to turn it off. Be sure to press "save" or the your choice will not be saved.

I have the manual for the Ameritech phone Model 1933. I have scanned it and email it to you, if you provide an email address I can send it to.

I don't know how to attach it on this website (which is new to me).

Page 25 of the owners manual says you can turn off talking caller id separately for the handset and base unit. For the handset, press [MENU], scroll to "Talk Caller ID" by pressing the down or up arrows, then press Select, then select "off" or "on", then press Save, then Off.

For the Handset, press [MENU], then scrol to "Initial setting", then press Select. Scroll to "Set base unit", press Select. Scroll to "Talk Caller ID", then press Select. Select "Off" or "On" by pressing up or down arrows.

To turn Talking Caller ID on or off
You can turn Talking Caller ID on or off for the handset and base unit separately. If
this feature is off, the unit will not announce caller names. The factory preset is ON.
Handset Talking Caller ID feature
1 Press [MENU].
2 Scroll to “Talk Caller ID” by pressing [d]
or [B], then press Select.
3 Select “Off” or “On” by pressing [d] or [B].
4 Press Save, then press [OFF].

Also Refer To Page 31 Of Your Owners Manual.

If You Do Not Have The Owners Manual It Can Be Downloaded Here.
http://support.radioshack.com/support_phones/doc73/73355.pdf

Thank You For Using Fixya.com

to turn the talking caller id off go to the menu press 0 then * then 4, then press 0 again to select off.

to turn the ringer on the handset back on, go to the menu, prees 1, 1, then press 1 for a low ringer, 2 for medium and 3 for high.

Hi trinigirl, You should not have to do anything to make the caller id information come through. There is no programming to perform for the regular caller id identification on your display after the second ring (it takes at least one ring cycle for the digital information to pass through). Your model also has the talking caller id function, which will announce in English the callers name or a custom name you can prepare in the phone book of handset number 1. With all that said, you are not getting caller id showing after the second ring, then your phone is bad (which is pretty rare for this symptom), or your phone line still does not have caller id activated. To troubleshoot your problem you need another phone line with working caller id and/or a different phone that is known good to pass caller id. That way you can interchange the phones/lines to see if it is your line or your phone. My guess it is your line somehow, though I have fixed phones that won't pass caller id, but rarely. If it is your phone, try rebooting it, thats about all you can do short of sending it in for repair. Let me know how it goes. CG

Here's the manual: http://thevariety.gullyroad.com/wp-content/uploads/2008/10/innovage-touch-panel-caller-id-speaker-phone-manual.pdf