I am looking for simmons crib model 1320 94 74 instructions ,or a model of crib like it to know what parts to order. thanks
You might want to check out this really great website I found. They seem to have all types of parts for any kind of crib. This may be what you are looking for. Good Luck!
http://www.productsamerica.com/index.html
Try 1800-772-1041. It's a crib replacement part place, actually replacement for lots of things.
I am putting together my oldest daughters old little folks crib and can't seem to find some parts. Need to see if you have pictures of the missing parts that i might have.
I just talked to the # listed above and they do not supports models older than 15 yrs. which is what I have. I'm going to keep looking for after market resources.
I have the same problem and just emailed Simmons Customer Support. They replied with a note to contact Delta Enterprises at 800/218-2741. I am calling them now and will post again if it's successful!
29,596 views
Usually answered in minutes!
I have the same crib and am also interested in the parts list. Thank you.
I also need the parts to put the crib back together again! Thanks
Hi I Do have the wall of the cribs and I NEED everything Can you help? thanks
missing kick bars
I have a similar problem, but a different Simmons crib. I called the company that momof4girls unrecommended and they were VERY helpful, but they were not able to ship me the parts as Simmons discontinued this type of hardware in the early 90's. My crib has a headboard and footboard - the 2 side boards are able to slide up and down on aluminum slats (almost 3 feet long.) The aluminum slats are connected to the headboards with 8 bolts; what I needed to order replacements of are the plastic sliders that allow the sidewalls to go up and down on the aluminum bracket. Not only do they allow it to go up and down, but without them you are not able to assemble the sidewalls to the crib at all. I solved the issue buy purchasing L brackets at Lowes and permanently attaching the sidewalls to the headboard and footboard, but it made it so the sidewalls did not raise or lower. I am ok with that! However, if you do NOT have the aluminum slats, you may be out of luck. The spring for the bed attaches on the aluminum brackets, so even if you were able to bolt the 4 sides together, you still have to figure out a way to attach the spring for the mattress (which connects by sliding a hook into holes on the aluminum bracket... no room for bolts here.) I am rather surprised that the hardware for this crib is plastic and aluminum; the bed is HEAVY and it is very difficult to put together as the aluminum slider is easily bent and the plastic sliders are flimsy. I actually broke the plastic pieces during assembly. No wonder this hardware was discontinued! I called Simmons and asked if they had an "updating' kit... they do not. Good luck!
I need instructions for Simmons crib model # 143091317.
I want some parts for crib model no 214060 00 235
×