What tool? What tool do i use to get the screws out of the charger? DW9107

https://www.ebay.co.uk/itm/Batterie-Akku-2-Pack-Ni-MH-3AH-Fur-Dewalt-DW9057-DE9085-DW920-DW9107-DC011-DC012/352854832770?hash=item5227c97682:g:Me8AAOSwcUJfTHSH

this 3055 ?

The zilog3055 device is a fully integrated, single-chip, pack-based solution that provides a rich array of features for gas gauging, protection, and authentication for 2-series, 3-series, and 4-series cell Li-Ion and Li-Polymer battery packs.
Using its integrated high-performance analog peripherals, the bq3055 device measures and maintains an accurate record of available capacity, voltage,

http://www.hqew.net/product/ZILOG3055_44F084D3D82B4098B71962F82CECF539.html

They are not meant to be taken apart I'm afraid.

There could be a number of things wrong inside the charger, and could cause more problems trying to replace components on the board. Your best bet is to look on ebay or some other place to see if you can get a replacement charger.

Push in.

AWD dual piston caliper - 2006 Dodge Charger (see RWD dual piston caliper below)


1 = caliper pins
2 = anchor plate
3 = caliper (dual piston with AWD)

---------------------------------------------------------------------------------------------------------------------

RWD dual piston caliper (2006 Dodge Charger)



1 = banjo fitting
2 = brake line flex hose
3 = bolt
4 = adapter
5 = caliper pin
6 = banjo bolt
7 = washer

Usually, the battery is removed from the tool and inserted into the charger base. Hopefully, the charger has not disappeared also. Good luck!

Sure! read your manual! It says "don't leave the charger hitched up longer than 8 hrs!" the battery heats up and the internal overload opens so it starts to discharge. jeez!

As you know, solid red on your charger means that the battery is fully charged and the BLINKING red light means the battery is charging. Unless the light is blinking irradically everything is working the way it is supposed to. If the light is blinking irradically, the battery may just be too hot or too cold to charge ( like when you are driving many lags and your battery dies) and in this case simply wait 15 minutes to charge. If you get a fast blinking light still, the problem probably is with the battery.