Nikon coolpix 4300 monitor lights up and displays

I'm afraid only a technician can repair this. Perhaps some parts must be replaced.
If the camera still makes good pictures, perhaps you better learn to live with the lines. Check is the white lines appear on an image you view on your computer. If so, the sensor or processor is damaged. Then you better start looking for a new camera, because that will be cheaper than to repair you S4300

Are you sure you did not change anything in the monitor settings?
Press the menu button, then got the wrench symbol in that part of the menu choose monitor settings and then press ok,
See what mode you are in and cycle through the possibilities. Don't stop where it says monitor off, but in one of the other settings.

Replace the battery charger, you stay at home to solve all the problems:
http://www.2deals.net/Battery-Charger/Nikon/Nikon-Coolpix-4300.html

http://www.2deals.net/Digital-Camera-Battery/Nikon/Nikon-Coolpix-4300.html

Hi there,

You can turn the flask off by pressing the flash mode button, it looks like this: You will see when the flash is off when an image is displayed on your screen which looks like this:

Thank you for using FixYa! Have a nice day and please remember to rate this solution.

Warm regards,
BearWeb

The 4300 cannot be used as a webcam. It only stores images (and videos) to internal memory or a memory card, not stream them live to another device.

In record mode, push the Flash Button (third button below the LCD screen). This will allow you to switch off the flash.

this solution was originally written by a fellow expert dauphine



You can download PictureProject software from this address: http://chsv-soft.nikon-image.com/jpn/software/win/S-P2____-175WU-JPNJP.exe

That is the only Nikon software that supports Vista since your camera is "outdated".

Here is a quote from Nikon site:

• We had released a Windows Vista-compatible version of PictureProject, v1.7.5, for use with the models listed below, and all models that followed. PTP (models supporting the PTP protocol) and Mass storage USB transfer options can be used for camera connection. However, the camera's transfer button can not be used to transfer pictures over a PTP connection. Set the USB transfer option to Mass storage to enable the camera's transfer button.
  Currently, the new Nikon Transfer and View NX will replace Picture Project as our new Image Transfer and Browser applications. These applications support the same Nikon products as Picture Project.

COOLPIX P4, COOLPIX P3, COOLPIX P2, COOLPIX P1,COOLPIX S10, COOLPIX S9, COOLPIX S8, COOLPIX S7c, COOLPIX S7, COOLPIX S6, COOLPIX S5, COOLPIX S4, COOLPIX S3, COOLPIX S2, COOLPIX S1,COOLPIX L6, COOLPIX L5, COOLPIX L4, COOLPIX L3, COOLPIX L2, COOLPIX L1/L101,COOLPIX SQ, COOLPIX 8800, COOLPIX 8700, COOLPIX 8400, COOLPIX 7900, COOLPIX 7600,COOLPIX 5900, COOLPIX 5700, COOLPIX 5600, COOLPIX 5400, COOLPIX 5200, (COOLPIX 5100), COOLPIX 5000, COOLPIX 4800, (COOLPIX 4600), COOLPIX 4500, COOLPIX 4300, COOLPIX 4200, COOLPIX 4100, COOLPIX 3700, COOLPIX 3500, COOLPIX 3200, COOLPIX 3100, COOLPIX 2500, COOLPIX 2200, COOLPIX 2100, COOLPIX 2000,COOLPIX 995, COOLPIX 885, COOLPIX 775.We do not plan to offer compatibility for COOLPIX 990 OR COOLPIX 880 connection to a computer with Windows Vista preinstalled. Use a card reader or card slot to transfer images.

I can't get an image on my coolpix L15 monitor screen, it just shows a bright light, it will snap pictures and show a flash , but no image

You can download PictureProject software from this address: http://chsv-soft.nikon-image.com/jpn/software/win/S-P2____-175WU-JPNJP.exe

That is the only Nikon software that supports Vista since your camera is "outdated".

Here is a quote from Nikon site:

• We had released a Windows Vista-compatible version of PictureProject, v1.7.5, for use with the models listed below, and all models that followed. PTP (models supporting the PTP protocol) and Mass storage USB transfer options can be used for camera connection. However, the camera's transfer button can not be used to transfer pictures over a PTP connection. Set the USB transfer option to Mass storage to enable the camera's transfer button.
  Currently, the new Nikon Transfer and View NX will replace Picture Project as our new Image Transfer and Browser applications. These applications support the same Nikon products as Picture Project.

COOLPIX P4, COOLPIX P3, COOLPIX P2, COOLPIX P1,COOLPIX S10, COOLPIX S9, COOLPIX S8, COOLPIX S7c, COOLPIX S7, COOLPIX S6, COOLPIX S5, COOLPIX S4, COOLPIX S3, COOLPIX S2, COOLPIX S1,COOLPIX L6, COOLPIX L5, COOLPIX L4, COOLPIX L3, COOLPIX L2, COOLPIX L1/L101,COOLPIX SQ, COOLPIX 8800, COOLPIX 8700, COOLPIX 8400, COOLPIX 7900, COOLPIX 7600,COOLPIX 5900, COOLPIX 5700, COOLPIX 5600, COOLPIX 5400, COOLPIX 5200, (COOLPIX 5100), COOLPIX 5000, COOLPIX 4800, (COOLPIX 4600), COOLPIX 4500, COOLPIX 4300, COOLPIX 4200, COOLPIX 4100, COOLPIX 3700, COOLPIX 3500, COOLPIX 3200, COOLPIX 3100, COOLPIX 2500, COOLPIX 2200, COOLPIX 2100, COOLPIX 2000,COOLPIX 995, COOLPIX 885, COOLPIX 775.We do not plan to offer compatibility for COOLPIX 990 OR COOLPIX 880 connection to a computer with Windows Vista preinstalled. Use a card reader or card slot to transfer images.

Find Nikon Authorized Repair Station . Best place to get your camera repaired.