Need a wiring diagram please

From google:

Kenwood KDC-217 (kdc217) Single-DIN Car Stereos - Sonic Electronix

https://www.sonicelectronix.com/item_1209_Kenwood-KDC-217.html

Detachable Faceplate; Maximum Power: 45 Watts x 4 (RMS Power: 22 Watts x 4); Preamp Outputs: Rear; System Q Sound Control; LCD Display: Color with ...

Searches related to Kenwood kdc 217

kenwood kdc-217 wiring diagram
kenwood kdc-217 aux
kenwood kdc wiring diagram

The manual for the Kenwood Excelon KDC-X679 has the wiring diagram for the connections to the car/truck on page 33. Crutchfield has the manual on the product page: http://www.crutchfield.com/S-FpCU7SY0yQm/p_113KDCX679/Kenwood-Excelon-KDC-X679.html . (Click on the Details tab.) The direct link to the manual is http://pdf.crutchfieldonline.com/ImageBank/v20050828082600/Manuals/113/113KDCX679.PDF .

Kenwood also has the manual on their support page: http://manual.kenwood.com/en_contents/search/ . Just enter the model number. On this site, you can find the manual is several languages. The direct link to the English version of the manual is http://manual.kenwood.com/files/B64-2764-00.pdf .


I hope this helps.

Cindy Wells

Normally caused by bad speaker, shorted speaker wire, or speaker impedence too low (lower than 4 ohm).

The speaker wire has a short or is touching the vehicle chassis. See the Troubleshooting Guide on page 22 of this manual.

Yellow from Connector A needs to be connected to a constant (unswitched) 12V+ source. Depending on the make and model of your vehicle, and whether or not you are using a vehicle-specific wiring harness, you may be able to simply connect the spade connectors or you may need to tap into the vehicle wiring.

Here's the manual. The wiring color code and diagram is on page 25.

http://manual.kenwood.com/files/B64-3488-00.pdf

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Download the latest version of Adobe Reader.

Hope this solves your problem. Thanks for using FixYa.

well if you mean how to wire it up to ur car buy a radio adapter from best buy and color match all wires

go to walmart they sell a harness to install radio in your car you just match wires color for color its that easy no cutting factory wires

Stephen, use this link. It will take you right to the download.

http://www.devicemanuals.com/guide/Car%20CD%20Receiver/Kenwood%20Italian/Kenwood-Italian-KDC-W3534A-Car-CD-Receiver-Owner's-==TVRFeE16RTQ=.html

Turn on the car so the radio is flashing "Protect." Look on the front / removable face of the stereo. On it you will find a small round hole - that's a reset button. Find a small paper clip, unfold the clip and stick it gently into the hole. The "Protect" will stop flashing, and Kenwood will be displayed. Unfortunately all your settings/presets will be gone, but at least the stereo is working again!