Need to turn answering service back on, and delete some messages.

Hi,

If the manual is not helping, then please check with your phone service provider to see if they can activate your voicemail from their end. If voicemail activation was based on your phone, then the manual would have helped you solve the problem. That's the reason why I think the phone provider would be the entity to reach out to. Thank you.

The KX-T7730 isn't an answering machine. You need to refer to the documentation for whatever answering/voicemail system you have it connected to. Alternatively, repost your question specifying the make and model of the answering/voicemail system.

Deleting messages (memory may be full).

Verify you do not have old messages on the the system. After the system plays all new messages, press Play/Stop again or from the handset Select 2:Play.If you find messages, delete them during or after they play.

After you listen to your messages, the voice message icon turns off. If it doesn't or if you can not receive messages, you should try to reset it: With the phone in standby, open the menu and select Global Setup; select VMWI Reset, then select Yes.

Make sure the Record Time is not set to Announce Only.

Sorry once you erase a message from a digital answering machine you can not get them back.

Turning on the answering system

Call your unit and wait for 15 rings.

•The unit will answer and the greeting message will be played.

•The answering system will turn on. Hang up or enter the remote code for other

options.

•When turning on the answering system using a rotary or pulse service telephone,

you cannot enter the remote code for other options.

I did not solve the problem, that is why I contacted you. Now you want to charge me, I am disappointed as this is a bait and switch scam. For shame.

Business journalist in Miami

Try this...
See if this works for you.

Remote Operation
When you are away from home, you can operate your answering system with any
touch-tone telephone.Use this function to check for recorded messages, to play or
delete messages, even record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code.
3) The answering system announces the current time and the number of messages
stored in memory. Then you hear "To play incoming message, press zero two.
For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command
from the following chart:

Command Function
0 then 1 Repeat a Message
0 then 2 Play Incoming Messages
0 then 3 Skip a Message
0 then 4 Delete a Message
0 then 5 Stop Operation
0 then 6 Answering System On
0 then 7 Memo Record/Stop*
0 then 8 Greeting Message Record/Stop*
0 then 9 Answering System Off
1 then 0 Voice Prompts

If you forgot to turn on answering system the directions for that are here:

Turn on the Answering System Remotely
If you have forgotten to turn on your answering system, you can turn it on remotely
from any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press 0 and then enter your PIN code. The answering system announces the
number of messages stored in memory. You hear "To play incoming message,
press zero two. For help, press one zero."
4) Press 0 then 6 to turn the answering system On. You hear the outgoing message
and a confirmation tone.
5) Hang up the phone; subsequent calls will be answered by the system.

http://service.us.panasonic.com/OPERMANPDF/KXTG5631.PDF

TRY LOOKING THROUGH THE MANUAL ON THIS LINK AND SEE IF IT HELPS

Panasonic has a feature for those who forget to turn their machine on. If the answering system is off, you can turn
it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
The unit answers your call with the
greeting message.
You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation. Pressing 0 will turn the machine back off.


Most people will not let the phone ring 15 times when calling you. No way to circumvent without unplugging from the phone jack.

answering from hell?? is that the message stored ??

this seems like a corrupted phone software