Panasonic KX-TG2631 Cordless Phone Logo
Anonymous Posted on Nov 16, 2009

Nothing shows up in the display. This has only been recently after a power glitch. The display lights when a call is made or received.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 05, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 05, 2010
Answers
1
Questions
0
Helped
773
Points
1

My phone did this well over a year ago. Then, recently, during a snow storm the power in the home begin to surge. Immediately following this the phone quite holding a charge. Then, suddenly one day the display screen started working (first time in over a year) and the phone begin to hold a much longer charge then ever before. I've found that when the display screen quits working now, jiggling or tapping the battery in the bottom of the headset will get it working again. Placing it on the charger results in the display disappearing again but tapping the battery gets it to work.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Nov 16, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 16, 2009
Answers
1
Questions
1
Helped
773
Points
1

I unplugged the base unit from the wall for more than 10 minutes. Sometime after I plugged it back in (not immediately)the display re-appeared.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

No picture

OK, the set is on if get the menu display and you have sound--either a video circuit problem or a glitch.

Do you get picture via the rear audio and video input jacks? this will rule some things out.

Also if not tried disconnect set, any box used, or a receiver from power for several minutes and power back (possible glitch).
0helpful
1answer

Power is on(green light) but nothing in display screen and cant get it to work. please help. thanks

hello my cuestion is that mij power is green ,and i haven nothing on my display?

greetz
paul pols
0helpful
1answer

Their is 3 red lights on the power button and nothing will show up on the screen of my xbox 360 arcade

I am sorry to report that you have the terrible red ring of death. This happens when there is a fatal glitch on the motherboard of the XBox due to overheating. There's nothing you could've done, it's just bad engineering on Microsoft's part. Do you happen to have the original receipt? If you bought it recently, it may be under warranty. You may also be able to exchange it at the store you bought it.
1helpful
1answer

Targus AMW15US wireless mouse

First are the batteries good?
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

0helpful
2answers

Dead Polycom 501

u have the cable plugged in backwards
check it
0helpful
1answer

No Sound

when the amp is turned on does the unit make a clicking sound a few seconds after the display lights up.

if not the amp's is not happy with it's power or could have a speaker short. Check the display for a fault warning.

Otherwise check you speaker connections.
confirm that and A and B main speaker buttons are correct.

Try some headphones, if you get sound out of the headphone things might not be too bad, if nothing is output remove all your cables and try again.

Yes I know that can be nasty, so label all the cables first.
0helpful
1answer

Eclipse CD8445

make sure that the additional box is hooked up to the cable, or else the display will not function
0helpful
1answer

JVC RX-DV5SL

disconnect the output devices and see if it clears. If it does, connect up the disconnected devices up till the reciver overloads again.
Not finding what you are looking for?

783 views

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...