No sound coming from headphones using my dj mixer. however through speakers sounds fine. Im using 2 pioneer cdj 1000 mk3 and a djm 800. The sound works perfectly through speakers. how ever nothing through my headphones. i have tried everything but nothing still....

Does it buzz through cans? (headphones). Try listening on headphones (turn off any amps and speakers) on cue to each channel you use and to the master output. is it stil there? if so it's an all round earthing fault. If it's all good through the cans (sorry...I mean headphones), try it with the amp/s on again. If the buzz is back it souds like the screen on the main audio output connecters has come off inside.
It's a quick fix, but if you have never used a solder iron, take to someone who has.

That sounds like you could have some dust built-up on your sliders. Get yourself some dust repellant spray or silicone spray normally found at you nearest computer store. That will definately sort your problem

GO TO SOUND PROPERTIES IN THE CONTROL PANAL AND SELECT HEAD PHONE AND APPLY.

To keep your levels down keep the TRIM don which is the gray knob. Also keep the hi, mid, and low knobs at the medium level. The control cables are for using the fader start function.

This may not be the correct solution, but have you checked the switches on the back of the DJM-400 to see if one output is set to "PHONO" mode?

you did not mention that you have a power amplifier to drive your Speakers. well you need to have one unless you have a powered speaker. the sugnal comes from the mixer main output goes to the input of your amp. or powered speaker.

Get yourself a manual. It will help you. You can DOWNLOAD A FREE COPY of the PIONEER DJM600 INSTRUCTION MANUAL from HERE.

Now, you have to use the CUE button function on each channel to select what you want to hear when you cue things in the headphones. Last, you control the volume of the master cue in the headphones using the CUE volume of the headphone CUE section.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

So you get power to the unit, but no sound coming out? How about through the headphones, do you get sound coming out of the headphones?

Are all the volumes and gains raised up? All the eq's are up? Check the back of the mixer, there is a master gain volume - where the connections are - make sure this is up also.

If nothing, then you'll need professional help at this point.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.

Picture freezing that is the symtoms of depected DMD modules...
Just click below for electronics store you can order online;

Partstore.com.

Vance Baldwin Electronics


http://servicemanuals.vstore.ca/


http://www.electronix.com/catalog/

Hope this may help;

Regards,
VOTIT

7027122524

Check your e-mail.