65 inch 2001 1080 model- has a rainbow effect that goes on and off-new tv ws 4k -

Panasonic TX-48CX400B 4K UHD 48 Inch TV (2015 Model ...

www.amazon.co.uk > ... > TVs

Amazon.com, Inc.Buy Panasonic TX-48CX400B 4K UHD 48 Inch TV (2015 Model) at Amazon UK. ...PRO GOLD RED HDMI v2.0/1.4a HDMI Cable 3D 2160p PS4 SKY HD 4K Ultra HD ...This tv offers excellent picture quality through HD sources and Netflix HD and ... TVand PC are both connected to my network switch with Ethernet cables).

for LED TV VIERA TX-48CX400B - Panasonic

www.panasonic.com/uk/.../viera-televisions/.../tx-48cx400b.ht...

PanasonicExplore the Panasonic TX-48CX400B - LED - Uncompromising 4K picture quality is yours with this 4K Ultra HD LED TV featuring an HDMI 2.0 terminal. ... Many describe the 4K effect as feeling more like looking through a window than watching ... Simplyhook up your various devices - such as a Blu-ray recorder or the latest ...Missing: turns ‎ps4

Panasonic VIERA TX48CX400B ' 48 inch 4K Ultra HD 3D ...

This tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than this tv have a dead convergence board.The tv convergence board require changes 2 STK convergence ICS and some or all of it resistors too.Fix the tv convergence board to solved the tv convergence pictures problems.The shop,will cost u like $300-350 for parts and labors.

Ur tv have convergence problems,it dead.Ur tv 2 STK convergence ICS,and some or all it resistors,must be repalced.The shop will cost u $300-350 for parts and labors.

The power supply will need to be replaced.

This is likely your convergence IC solder connections. Does it look bowed and rainbow colored? The red, green, and blue will be mis-aligned causing a shadow effect. If you can bump it then the ICs (chips) are still ok, it just needs resoldering.

I think This Company can help you to get new screen for your Mitsubishi TV.

I have a same issue. What part is failed? Give us a solution. Thanks.

look for the CONVERGENCE settings either behind a small panel on the front or through the menu with the remote control

Your TV is probably shutting down due to excessive current draw. Replace the filter capacitor in the power supply and cross your fingers. This will be a large, tall, and round shaped object near the location where your power cord goes into the TV. It has two pins and one is positive and other is negative. Do not get them crosses when installing new part. keever