Need the RAV-300 Remote Control Setting Steps

To perform a factory reset on a Yamaha RAV 352 remote for use with an RX-V2500 receiver, follow these steps:
1. Turn on the RX-V2500 receiver using its power button or remote control.
2. On the remote, press and hold the "VCR 1" and "ON/STANDBY" buttons simultaneously. Hold both buttons for about five seconds until the remote's indicator light blinks twice.
3. Release the buttons. The remote control should now be reset to its factory default settings.
4. Test the remote by using it to control the RX-V2500 receiver. Make sure the remote is within range and pointed towards the receiver's IR sensor.
If the factory reset doesn't resolve any issues you're experiencing with the remote control, you may need to try replacing the batteries or consider getting a replacement remote from Yamaha or an authorized dealer.
Please note that the steps provided are based on general instructions for Yamaha remotes, and there might be slight variations in the specific procedure for your RAV 352 model. Consulting the user manual for your specific remote or contacting Yamaha customer support can provide you with more accurate and detailed instructions tailored to your device.

?? I would say thats the way it is supposed to work. The remote has selected the TV and if you change it to Radio, it will turn the TV off and vice versa...

How to program my rav 300 remote

I uploaded the list of remote codes here: RAV331 Remote Codes. I hope this helps- it took me an hour to find the stupid CD that came with my receiver and remote!! As for steps to program: Press the CODE SET button, the LED will blink twice. Then press the input button you want to control (HDMI1, 2, etc...) or the power button down in the TV section at the bottom of the remote. The LED will blink at you again. Then enter the 4 digit code you find in the list of devices and the LED will blink several times to let you know you've set the code. Try powering on/off your device; if it doesn't work, try another code using the same steps!

You can get the manual on the link below. Scroll down to product details then click on manual.

http://www.amazon.com/Yamaha-RAV-2000-Programmable-Remote-Control/dp/B000066AYY

Do any experts know the answer to this question? It has been posted multiple times, but I dont' see any answers! It is a pitiful manual that is provided by Yamaha for this purpose and nothing is intuitive about making this work. If anyone know the answer, PLEASE POST IT!

Does anyone know where to find a user manual or instructions to use the Yamaha RAV250 remote control?

Here are the codes in RAV_CODES.tif
Raf

It does not prompt you to enter your code, simply hold the 2 buttons for a few seconds, then enter the code you have. If successful, it will read remotesetup OK. Hope this helps and if you have any codes for techics cd players, let me know!

Here's how I got mine to work. FIRST THING: Once it's programmed, you use the TV function keys at the bottom of the remote for Power On, channel changing, etc. The other keys on the remote don't operate the TV.

1) Press the "code set" button with a pen or straightened paper clip
2) Press the [A] key (next to "V-AUX")
3) Enter the code

Test it by pressing the Power key in the TV section on the remote (NOT the "Source" Power" key or Main power key at the top).