Question about GE WDSR2080D Top Load Washer
Here is a few tips that might help you out
Hope that they are very helpful for you
Best regards Mike
Washing machine is leaking Washing machine leaks are very common. There are many places a washing machine can leak from although most leaks come from the same few places. The most common cause for a leaking washing machine is the door seal. Door seals often get holes in them and water leaks down the inside of the washing machine which then runs out under the front. Water leaking down the front of the washing machine from the door can be caused by a worn door seal (the flange part that the door glass presses against when closed) or something trapped between the door seal and the door glass which breaks the seal. If the door seal doesn't look worn, or it's too young to be worn, then try cleaning the door seal's flange and the door glass on the inside of the door. Bits of cotton, un dissolved washing machine detergent etc can cause a leak.
Soap dispenser leaks
The next most common cause of a leaking washing machine is the soap dispenser. Leaking water from a soap dispenser is often caused by a blockage, or water pressure that is simply too high. Despite seeing many leaking soap dispensers, I've never seen a soap drawer with a seal, they just rely on water not getting to the front which is not really good enough. Some Hoover soap dispensers in particular, are renowned for leaking, and over the years Hoover have had to introduce modified soap dispensers twice.
Some washing machines, can flood water out of the soap dispenser when a hose gets blocked (usually with un dissolved soap powder) Indesit, and Candy, as well as some of the later Hoover washing machines suffered from this design flaw. The hose where the water is flushed down, was right at the front of the soap dispenser on these washing machines and the hose wasn't wide enough. Un dissolved powder from a tablet or lumps of detergent through poor hot water pressure can block this hose solid. (Note: water flooding out of the front of a washing machine's soap dispenser can also be an indication of overfilling or a partial pump blockage if it does it when spinning)
Finally, black gunge in the top of the soap dispenser can cause water to spray towards the front and leak. Take out the soap dispenser drawer and look at the roof of the soap dispenser. If it's covered in black gunge, blocking some of the water holes, it could be causing problems. In extreme cases I've had to replace the dispenser.
Tips for finding a leak on a washing machine
Posted on Nov 13, 2009
I think that the water is only coming out during the spining at the end, and i have notised that the rubber seal is worpt so i think that the water must be ascaping in the gaps by the rubber seal, i have an eurotech WA R1600, is there anyone who can put a new rubber in the washing machine?How much does this rubber cost,and is it possibel for me do do it my self?
Posted on Jul 16, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 21, 2014 | Maytag Neptune FAV6800AW Top Load Washer
Aug 04, 2017 | GE WBSE3120B Top Load Washer
Aug 02, 2010 | GE WBSR3140DW Top Load Washer
Jan 04, 2010 | GE WSXH208A Front Load Washer
Nov 01, 2009 | GE WDSR2080D Top Load Washer
Oct 13, 2009 | Maytag Performa PAV2200
Jul 08, 2009 | Washing Machines
Aug 03, 2017 | Whirlpool Ultimate Care II LSQ9549L Top...
Sep 07, 2007 | Maytag MAT13MN Top Load Washer
1,571 people viewed this question
Usually answered in minutes!