The problem I am having is: Can not get the washer to open error code DLF ( which is door lock fail).. Will not even start nor does the door lock even light up on the control panel.. I have clothes in the washer that are starting to smell.. PLEASE HELP!!!
Thanks,
Tiana
My machine just died. No codes, no nothing. I thought it had blew a fuse. But the outlet is fine. There is no power to the unit. There is a load in the machine and I can't get it out. Help
There are two screws located at the bottom of the washers' lower panel. Remove these screws and gently remove the panel. Locate and remove the 2-4 screws that hold the front onto the machine. This will allow you to move the front forward enough to access the locking mechanism. You have to reach up inside and feel around to find it. Different machines use different locks so you may have to play around until the latch releases.
Hello and welcome to FixYa
DL f is a door lock error and is caused due to an
issue with the door lock when it is unable to lock/unlock. Please check the
door lock mechanism/door switch assembly and replace the part that has gone bad
so that the issue is resolved. Please get back to me if you have any other
questions.
Kevin
Hello and welcome to FixYa
DL f is a door lock error and is caused due to an
issue with the door lock when it is unable to lock/unlock. Please check the
door lock mechanism/door switch assembly and replace the part that has gone bad
so that the issue is resolved. Please get back to me if you have any other
questions.
Kevin
584 views
Usually answered in minutes!
the front end washer lock broke. My hsband replaced it. Now we can open and shut the door. The problem is that the washer will not start washing.
×