Step 1
Lift the handset for your telephone and listen for the dial tone. Dial the access code you were given by Verizon when you signed up for residential telephone service. Dialing the access code will call the voicemail system. If you do not have an access code, you will need to call Verizon Customer Service (see link in Resources).
Decide if you want to set up a different mailbox for each family member. Verizon residential telephone service allows you to set up multiple mailboxes so that everyone can have his own private message center. Callers who reach voicemail will be prompted to press "1" to leave a message for one person, press "2" for the next person, and so on.
SOURCE: Voice Mail
There are two extra mailboxes in a Panasonic brand voice mail, one for the message manager and one for the sytsem manager.
You reset passwords from the system manager's mailbox. Dial into the system and key in the codes to get to the system manager's mailbox. and select option 6 1 1 and the mailbox number. One of the options will be to reset the password :-)
Carl
SOURCE: How to change the voice mail message on KP DCS - 24B LCD samsung
I have the manual for the DCS series and there is no help regarding this.
It does say how to turn from auto to manual and make sure that the time is correct.
1. If the manual NIGHT key is pressed BEFORE the system automatically enters night service then the automatic night service timer tables will be overriden until the system is manually restored to day mode.
2. If AFTER the system automatically enters the night service tables and will not be overriden.
SOURCE: voice mail
First Call or activate your voicemail like your about to check it
Then click on the number that the lady says is options
Last click on the change voicemail number and record
SOURCE: Transfer calls to voice mail
It depends on what system the 7731 is attached to. If it's a TA system, that you dial either 107 or 115 to get to the Panasonic brand voice mail system, you take a spare button from the left side keys and press PROGRAM the spare button and dial 94+107 or 115 then STORE.
Pick up the handset and drop it back down to end programming. Then label the button VTR. When a call comes in, you press VTR and dial the extension or press the DSS (extension) button. You don't press HOLD or TRANSFER, just the VTR button.
It's all on page 158 of the OM http://www.public.carl.airpost.net/Pana/TA-824/200_TA_OM_07-04%5B1%5D.pdf
If you are not using a TA series system, the instructions may be different.
Carl
SOURCE: I need to change voice
How do I change the voice message on my panasonic digital voice mail system, mode kx-tg2000B. I lost the manuel.
448 views
Usually answered in minutes!
×