The water does not get pumped out of my hoover performer washing machine. Is there a filter that can be checked? I thing it is at the bottom but cant seem to open it.
The filter is to be found at the bottom front left of washer behind a removeable plastic trim, if you can see a screw in the filter cover, undo this, and turn filter anticlockwise to remove.
If no filter at front, then remove rear panel of washer, and remove large black hose fastened to drum, check for blockage here, and check the pump at the same time.
.
Thanks
.Please rate my solution;
Testimonial: "Thank you so much and vert helpful. Found the filter and undid screw, but the knob couldn't be turned. However the fault seems to have gone away.D.B."
Git a hoover vision hd 8kg. sometimes it doesent spin but now developed another fault of stopping half way through cycle and just flashes timer saver. no code as it is not digital, any ideas
1,417 views
Usually answered in minutes!
×