Hi. Is this to change its settings?
Plug directly in the DAP-1522.
Set your PCs network settings under TCP/IP, alternate config:
IP Address: 192.168.0.10
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.50
Give it a try.
Regards,
HOLY $hit !!!!! This worked!!!!
I've wasted a whole day trying to figure this out (... and I'm fairly good at computers, but this was a 8itch).
This works for Windows 7 (64-bit version, updated as of March 21, 2011).
DLink DAP-1522 Xtreme N Duo
Part Number: CAP1522ACA...A1
Hardware ver.: A1
Firmware ver.: 1.21
IP Address: 192.168.0.50
Follow the instructions mentioned above to the T.
The following information maybe long-winded but I hope some of this additional info helps others who are having a SON-OF-A-8ITCH, like I did.
I've also disabled the wireless adapter on my laptop. You don't need Wireless connection, since you will be using the network cable (mostly the BLUE cable (CAT5), maybe a different color too, still trying to look for pink, hehehe).
YES, you MUST connect your computer to the DLink DAP-1522 using the network cable. Use any port on the back of the DLink DAP-1522 and to your laptop/computer.
My Network Settings had two Internet TCP/IP Protocol's (ver4 and ver6). I made the changes to the ver4 TCP/IP Protocol (and NOT the ver6).
I also unchecked several of the other items, which only left the following CHECKED:
\' client for MS networks
\' QoS packet scheduler
\' File and printer sharing for MS networks
\' Internet protocol version 4 (TCIP/IPver4)
...... sorry for the \' above. This is my symbol for a "check mark."
NOTES:
Not sure if this matters... but these are some of the things I've also done....
- the switch on the back of my DLink DAP-1522 is set to "BRIDGE."
- I didn't need to push the button on the top of the DLink DAP-1522.
- My Windows Network connection is a "public network" (with no internet).
- Windows Firewall is ON.
- I did not flash to a newer version of Firmware (still have 1.21).
You will notice the network icon in the tray has a yellow <!> but don't worry because we know there is no Internet access, all we want is just a link connection to the DLink DAP-1522 Bridge so we can get into the web-based GUI of the DLink SAP-1522 Bridge, and play.
Once you gain access to the DLink DAP-1522 built-in Web Browser, by opening Internet Explorer and typing the address 192.168.0.50 you will be shown the Log-In page.
User Name: admin
Password: - (no password, keep blank)
Chris (from Canada, eh)
Thank you so very much DJC! Really was about to give up trying to solve this...
Tjitte
I am running Win7x64.
1) I connected my computer to the DAP-1522 using a cable.
2) In control panel ' network and sharing center I clicked on See full map. This displayed the DAP-1522.
3) I hovered the pointer over the DAP-1522 in the visual display. This showed the IP address of the device. It was unnecessary to copy it Instead,
4) I right-clicked and then left-clicked, and the device opened in my browser.
14,105 views
Usually answered in minutes!
×