Recently re-installed windows xp on my e-machines T2542 and now my speakers (Diamond Audio Techonology Model EMC2.0-USB) do not work. I downloaded RealTek AC '97 Audio, but it does not show up in my Device Manager. Do I need to re-install the sound card? How do I do that?

here the link for the drivers on your unit http://support.gateway.com/us/en/emac/product/default.aspx?modelId=1511 just download the driver for your audio. Hope it works!

please download proper sound driver for win 7 and instal properlly

You need to install the audio driver again.
You can download the drivers from the Compaq/HP WEB support/download page. Make sure you select your model laptop and the XP or Vista Windows version of the drivers you require and install them. Use this link to download the drivers: -
www.compaq.com/country/cpq_support.html

In order for us to assess possible drivers that are available for the eMachines T-Series T2542, please download the trial of Driver Detective and run it to ensure a more accurate list of drivers for your computer with less chance of error.
http://www.drivershq.com/Drivers/eMachines/T-Series/T2542/22605/22647/22688/Drivers.aspx

Youre lacking audio drivers for your newly installed Windows XP. Could you report your laptop manufacturer and model?

You may need to install the audio drivers for those systems. If the sound is built onto the mainboard, you'll need the motherboard model number to help locate the drivers online. You can look for them yourself through a search engine, or if you'd like, get back to me with the model numbers of the motherboards, and I will locate your drivers. The model number of the motherboard should be printed directly on the motherboard itself.

this modem is not support the vista you have to go for the win xp or win 2000 i just give the link to download the driver for win xp or win 2000

ok
http://www.hzjdr.com/drivers/diamond/diamond-supra-max-usb-sup2920-windows-2000xp-download-driver-modem.html"

What do you mean, "cleaned out my computer"? If you mean removing software then you've probably removed drivers for the audio hardware in your computer. If you got a "driver" disk with your computer, re-install the sound drivers and you'll be up n running in no time !!!

in the bios because you set HD audio to audio it may be that you need to download the HD Audio driver from microsoft

Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


for Radio Shack,

Copy this site and paste it in your web browser address bar and hit your enter key.

http://www.radioshack.com/uc/index.jsp?help=yes&page=software

It has the Description and Model number.

Then download the driver for your camera and install it as below.
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud