Question about RIM BlackBerry Pearl Flip 8220 Cellular Phone

1 Answer

I want to change the answer option so i dont answer until i press the green handset button?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 173 Answers

To use Answer button on the BlackBerry smartphone, complete the following steps:
1) On the Handheld press Call button.
2) Press the Menu key.
3) Select Options.
4) Select General option.
5) Select Auto answer calls to, Never.
6) Select Auto end calls to, Into holster.
7) Click on save.
I hope I was able to help you.
Thank you for using Fixya.

Posted on Nov 16, 2009

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

System error #1 Panasonic kxtg2770


spacer.gif spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1)On handset, press MENU, 0, 0, 1.
Handset display shows as follows.

ts_hsinset_locator.gif

*Skip this step when handset already shows as above.

2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes.

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Panasonic Services Company Customer Servicenter
Suite B 4900 George McVay Drive
McAllen, TX 7850


spacer.gif
spacer.gif
1) Press FUNCTION on handset. Then, using the Navigator key, press Down (V) 4 times, Right (>) 1 time, Down (V) 7 times, Right (>) 2 times.
Handset display shows as follows.

ts_hsinset_mute.gif

*Skip this step when handset already shows as above.

2) On base unit, press MUTE. (MUTE LED flashes.)

3) On handset, press OK button. Then wait until the handset display changes as follows.

ts_hsinset_hsregistering.gif
spacer.gif
ts_hsinset_hsregistered.gif

If you receive an error message indicating the maximum number of handsets have been registered, you will need to deregister the handset from the base unit, then try to register again.

*If this does not work, your unit is defective. Please send your unit for service.

Dec 04, 2010 | Panasonic KX-TG2770 Phone System w/...

3 Answers

Instruction Manual


Hi,

There is no user manua l available for this model anywhere.The only way to get the manual is to call the Main support number at 1-800-626-2005 and tell them to email you a copy of it.

If you need anymore help let me know.
Please don't forget to rate or accept the solution

Jun 26, 2008 | GE (WMM317440) Answering Machine

1 Answer

The handset lights up and the incoming number is shown but you dont hear it ringing


Many times there is a volume switch on the actual handset itself. Most commonly on the left side of vtech devices. there are three different volume levels. By pressing up on the button you should be able to turn the volume up until it has an audible tone confirming volume change. Handset should ring with incoming call when audible tone is heard by pressing up on volume button.

Oct 13, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

I need to know how to program the numbers into the speed dial option. My mother's phone is a table set with large numbers #29267A ... close enough?


Before you store a telephone number in memory, make sure the dialing mode is
correctly set for the type of service you have. The default dialing mode is tone
(touch-tone), so if you have pulse (rotary) service, you must first change the dialing
mode. See “To Set the Dial Mode.” The following buttons can be stored into any
memory location: 0-9.
STORING FREQUENTLY CALLED NUMBERS
1. Pick up the handset.
2.Press the store button.
3. Push the desired memory location button.
4. Press the store button.
5.Use the handset number keys to enter the telephone number (up to 16-digits)
and press the store button.
6.Hang up the handset.
NOTE: If you make a mistake, use the delete button to delete wrong digits.
CHANGING A STORED NUMBER
Repeat the storage sequence above. The new number replaces the old number at
the memory location.
ERASING A STORED NUMBER
1. Pick up the handset.
2.Press the store button.
3.Press the memory location (0-9) to be erased.
4.Press delete for three seconds until the number in the display is erased.
5.Hang up the handset.
DIALING FREQUENTLY CALLED NUMBERS
1. Pick up the handset and press the mem button.
2. Press 0-9 for the memory location. The number dials automatically.
OR
1. Pick up the handset and press the dial button.
2. Press the review button for the desired memory location.
3. Press the dial button to dial the number.
OR
1. Press dial button while the handset is still in the cradle.
2. Press the review button for the desired memory location, lift the handset and the
number dials automatically.

Download User Manual

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thank you.

Feb 02, 2010 | GE 29267GE3 Corded Phone

1 Answer

NO CALLER ID 25881EE3-A


The GE Cordless Phonemag-glass_10x10.gif brand is designed to deliver the conveniences of cordless home service with quality sound and features. There are many models of the GE Cordless Phone. The most current models, including the DECT 6.0, have standard features such as call waiting, caller ID, visual ring indicator, phone number memory and digital answering systems.
    Before You Start
  1. Before you use your GE Cordless Phone, ensure that you have all the parts. Your cordless phone package should include the phone base, a handset battery pack, a battery compartment cover, the cordless handset, a wall mount bracket, and a telephone line cord and AC power adaptor. Once you have confirmed that you have all of your parts, insert the handset battery pack into the handset and replace the battery compartment cover. Insert your telephone line cord and the AC power adapter into the phone base. The phone base identifies the telephone line as TEL LINE and the adapter as AC. Plug the phone base into the electrical socket. Place the cordless handset into the base. Allow the phone to charge for at least 16 hours before its first use. Failure to fully charge the battery before its first use will result in poor battery performance.
  2. Phone Setup
  3. Once you have fully charged your phone, you can proceed with setting up your phone's features. If your cordless phone includes an answering system, complete this setup process first. Turn on the answering system by pressing the on/off button. The message indicator light will display. The cordless phones are defaulted to English as the selected language. To change your language preference, press the "Skip" button for two seconds. The language will change to Spanish. Next, you will set up your voice time and day stamp. While the answering system is on, press the "Answer" button on your handset for two seconds. The phone will enter the answerer mode. Press the "8" key. This will take you to the time/day setup menu. Use the number keys to set the hour and minutes. Use the volume up and down arrows to set the AM/PM. Press "#" to save. The cordless handset will also require that you give it a name. Press the "Mute" button for two seconds until the handset reads "ENTER NAME." Enter the name of the handset by using the touchtone keypad. Press the "Mute" button to save. Enter the default area code by pressing "Mute" until the phone displays "AREA CODE." Enter your three-digit area code and press the "Mute" button to save.
  4. The Basics
  5. GE Cordless Phones are designed to be simple and convenient to use. To place or answer a call, press the TALK button. You can pre-dial a number by dialing the number before pressing the TALK button. When you are ready to make the call, press TALK and the phone will dial automatically. To answer a call that is waiting on the other line, press the FLASH button. If you experience call interference or bad reception while on a call, press the CHANNEL button until your line clears.
jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });


Nov 14, 2009 | Uniden Cordless Phone

2 Answers

Want to turn off voicemail Don't know codes


Hi,

To turn off voice mail please dial ##002#, this would do the trick.

Regards

Oct 13, 2009 | RCA 25450 4-Line Extended Range Multi...

1 Answer

Plantronics CS55 requires lifting handset on phone


Please note that your hand receiver has to be off the hook when using the headset.

This is correct, additionally you can use a handset lifter accessory, such as the HL1 or HL10.

Subscribing Headset to Base:

The headset and the base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with the base unit (or if you lose your connection to the base unit), then you must re-subscribe as follows:

1. Return the headset to the charging base.

2. Press and hold both the + and - buttons on the back of the charging base until the red light on the front of the base starts to flash.

3. Let go of both buttons. The red light should continue to flash.

4. Press the mute switch (black wheel on the top of the headset) straight down until a green light appears on the headset, then let go of the wheel, and the light should remain on the headset.

5. Resubscription is finished when the red light on the base is fully illuminated and the green light on the headset disappears.

6. Remove the headset from the charging base lift telephone handset/press headset button if not using a handset lifter. The headset and base should now be connected.

7. If this procedure does not resolve your issue to try a system reset.

May 28, 2009 | Plantronics CS55 Wireless Headset

1 Answer

Cant turn auto answer off; no general option icon in my options


on your phone press the green send button once. that will bring up your call log. then press the menu button and that will bring up a new screen. scroll down until you find the options and select it. it will then bring up the phone options menu. selct general options and then you will be able to change you answer options

Mar 27, 2009 | RIM BlackBerry Pearl Flip 8220 Cellular...

4 Answers

Ge phone answering machine


The solution for the base (not the handset) is to press and hold for 2 seconds the "Skip" button (it's marked with ">>").

Aug 27, 2007 | GE 25951EE2 Phone

1 Answer

Verge cordless phone system v581tad


I believe you have the expansion capacity of the phone all used up. The phone cannot register any more handsets until you delete the handset registered that is not in use. First check the handsets and see what handset numbers they carry. It should be #1,#2,#3,and #4 if it does not then you will have to delete the one that is missing or if it is then delete handset #5.To do this you will have to use one of the handsets registered to the base. First Press the MENU/ OK button then scroll down to ADV,SETTING then Press MENU/OK then scroll down to DEREGISTER then Press MENU/OK. Then ENTER HANDSET PIN would show, if you have not changed the pin enter 0000 if you have enter your pin member. From the next options select HANDSET and press MENU/OK from the next set of options select the handset number you want to DEREGISTER and press MENU/OK from the next option select YES then MENU/OK. Then try to reregister the new handset To do this Press the MENU/OK button then go to ADVANCE SETTING press MENU.OK scroll to REGISTER then press MENU/OK Select the base number displayed then press MENU/OK. PLEASE WAIT will appear. Then from the base press and hold the PAGE button until the handset prompts you to ENTER PIN # .Enter 0000 OR your pin number then you will see PLEASE WAIT. A tone will confirm the handset registration.

Apr 03, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
RIM BlackBerry Pearl Flip 8220 Cellular Phone Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top RIM Cell Phones Experts

RONALD CARTER JR

Level 3 Expert

438 Answers

Ekse

Level 3 Expert

13434 Answers

William Norris
William Norris

Level 2 Expert

107 Answers

Are you a RIM Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...