I have a samsung le32r41bd flat screen i also have 2 stand up speakers and when i plug them in nothing happens can anyone tell me what im doing wrong ta!

Most likely a problem with the products manual control panel on the tv. one or more of the buttons are either stuck or corrupted. Find this part and you can fix the set.

samsung tantus flat screen tv wen turn ton the green blinks for some seconds an then stop

Hai, try this steps:

1. plug RF antena as source first. Make sure it connected properly.
2. Switch on TV set.
3. Enter to Menu
4. Select Channel --> Select area
5. Choose manual or auto store .

Thats it. I hope will help you.

No one will sell you a stand, you will need a wall-mount kit

yes go to www.shopjimmy.com get the main board of your tv and replace it lcds usually have 2 power supply and the main one thats the problem tv repair man told me it incharged of all your inputs sound and picture but he was charging too much and the manufacturer too 149.00 shop jimmy 108 with shipping glad too help you and you r welcome and it aint no science to do it your self do it on top of your bed thats how i did mines in order to get the model number have to be real careful with the screen oh and you r welcome

i need a password for phone freezed plz from craig

I took it back and got a full refund.

in order for me to help you and answer your questions explain to me exactly what happened up to this problem and what exactly happened ok.

they must try to repair the smps [puff capacitors]first.then try a master reset thru the service mode.if these steps do mot solve the problem replace the t-con board on lcd panel.

I can switch between shop mode & normal by holding down the menu key on the side of the screen, just press it till it changes.