I need new software, i have software that i need to down load but i cant put A x64 on a x84 platform, i need help . i have embroidery sewing machine singer ce 250, the software what i get can't install to my pc. I need some advice, do I need something to make it work. Thank's.

try the manufacturer web site for a down load disc for your machine or pdf version down load that you can down load to stick or cd

Your new embroidery program has to be loaded first. The 2b7 is referring to needing instructions or in other words the embroidery program has to be loaded. Shut the machine down and turn the machine back on and load just as before.

There is an update to give an x64 driver for the Singer CE-250 that will let you run on an x64. With the sewing machine not connected to the computer, install the software that came with the machine. Click OK at all of the "cannot run x86 build on a 64-bit OS" messages. When it is done, install the software from http://futura-support.com/products/ce-250/software . (The second one is for XP, Vista, and Win7 versions.) Accept the unverified driver (install anyway). After this completes, then connect the sewing machine to the USB port on the computer.

Similar patches exist for the CE-200.

I hope this helps. Please add a comment with the version number of your software. I know with Husqvarna Viking's 3D Embroidery, there are versions that can be upgraded to work with x64 and versions that are not patchable.

Cindy Wells

I just bought a new Futura CE250 & had the same problem.

I fixed my "can not run an x86 build of this utility on x64 platform" by visiting the futura support website & downloading a service update. I have a computer with Windows 7 installed.

The website is www.futura-support.com

When you are there, click on the link on the left for "Service Updates."

The actual link to where I downloaded my udate is: http://www.futura-support.com/downloads/ce150.html

Happy Embroidering!!!

try uninstalling and reinstalling the software, if you have vista or windows 7 you may want to check for a patch or update

You can't just copy the files to the stick, you need to do it through the Husqvarna software, which then writes the files in a format that the sewing machine can read

I just bought a new Futura CE250 & had the same problem.

I fixed my "can not run an x86 build of this utility on x64 platform" by visiting the futura support website & downloading a service update. I have a computer with Windows 7 installed. There are also updates for Windows Vista & other operating systems as well.

The website is www.futura-support.com

When you are there, click on the link on the left for "Service Updates."

The actual link to where I downloaded my udate is: http://www.futura-support.com/downloads/ce150.html

HAPPY EMBROIDERING!!!!!

I had the same problem and after buying a new card, found out that you get that message if the pattern you are trying to transfer is too big. reduce the size of the pattern and see if that works

Four questions:
What model Husqvarna sewing machine are you using?
Are you using a Husqvarna formatted USB stick?
Is the embroidery unit attached when you put in the stick?
Is your machine using the latest version of its software?

I might be able to give some more specific help once I know the answers to the above.
Pamsquilt

You need the USB Manager software to view the files. Have a look at all the software that were supplied with the machine. Load the embroidery software on your laptop and then open the USB manager.

When it opens it will show a light blue screen and grey icons to the left. Click in "disk", then click on "read disk" and you should be able to see your designs. The grey icons will turn orange were designs are stored, and the grey ones indicate empty space for more designs.

Enjoy your fantastic machine