Sylvania LC320SL8 Television Logo
Posted on Jan 02, 2008

Remote Control Codes don't work with my LCD TV

Hello,

I recently bought a Sylvania 32" LCD TV. My Motorola DVR/Cable box remote control(supplied by Comcast) won't work with my new TV. I've tried the supplied codes that came with the DVR, none worked. I also tried the "code search" function, no luck there.
DVR model: DCT3416 I
Sylvania model: LC320SL8

Can you help?

  • 4 more comments 
  • Anonymous Jan 04, 2008

    nEED TV CODE FOR sYNERY v REMOTE FROM TIME WARNER

  • Anonymous Feb 12, 2008

    need remote control codes for direct tv i have a 6419te 19'

  • bryan28752 Feb 08, 2009

    I HAVE SAME PROBLEM WITH SLVANIA 32" LIMITED EDITION TV,THE REMOTE FROM CHARTER "WHICH IS MADE BY UNIVERSAL WONT WORK" I PURCHASED A SIX UNIT PHILIPS REMOTE AND IT OPERATES ALL BUT THE TV. I'M AT A LOSS

  • Anonymous Mar 15, 2014

    tv responds to the remote but not with DVR

  • Anonymous Mar 18, 2014

    dvr remote control does not control volume

  • Anonymous Mar 25, 2014

    Problem started when I replace dvr cable box

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 21, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 21, 2009
Answers
1
Questions
0
Helped
549
Points
1

I have been using two remotes for two years. Even the Logitech remote did not work. I saw a posting for the Icon Remote from X10.com. Finally something works. I still have to hit TV before adjusting the volume but that is better than reaching for another remote. At first I saw this Icon advertised for 99.00 but then found a "special" for $49.00. It works well with my Dish DVR, guide, menu, pause etc. I may buy another!

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 8 Answers
  • Posted on Mar 01, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Mar 01, 2008
Answers
8
Questions
1
Helped
11029
Points
13

There is no code!!! -- Solution...You have to buy a universal remote with learning capabilities. I’ve ordered one that will not only learn off other remotes but can handle 10 components also. I got it from 10x it’s called the iconRemote control…if you call the company they will give you a discount (but you have to call them and ask) AWESOME!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Sylvania 15 inch digital/analog LCD TV HDTV. Once

try doing the auto search method on the cable remote. sometimes this works when the codes do not. if it doesn't then it is what it is.
0helpful
1answer

I cannot locate the remote control code for my TV

you can get another one from your cable server,or you can get a universal remote
35helpful
2answers

Can't get my hannspree remote to work with comcast

10030 for the comcast dvr remote. Code is from NEC
0helpful
1answer

Cox Cable Remote wont program to my Sylvania LC320ss8 tv.

there are different codes for the devices that you are using. When you want to insert the code for the tv. > Switch tv on and then switch all the other devices off. Insert code. For digi box > switch on and all other devices off. Insert code for digibox. You must then switch between tv and digi box using the buttons on the top of the remote. Toggle between tv/ digi box.

Have a go with the codes below with the tv and the digibox both on, you never know you might get lucky as these are new codes, if not revert back to 1st solution.

Universal Codes (both should work using these, i think!!!!! try 'em)

002,
008,
155,
198,
227,
231

Here are the codes for the 1st solution.


Good Luck,

Hughie.
Tv

0062
0004
0009
0135
0189
0183
1141
0227
0456
0008
0068
0075
0141
0161

Digi Box.

0899
0227
0287
0290
0225
0456
0251
0292
0236
0458
1106
0helpful
2answers

Need remote code for LC420SS8

SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then:
Turn on your TV.
On the remote control, press TV once. Then press and hold Setup until the key blinks twice, then release Setup.
Enter 9 - 9 - 1- 1. The TV key will blink twice.
Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device.
Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
Press Setup once to lock in the code. The TV key will blink twice.
To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for.
0helpful
2answers

Programming the Acquos Remote

There is a code out there to try.  The code would be 47.  Just follow the steps in your manual on how to program this box and you should be able to go from there. Can't garantee that it will work as that code came out with the newer tv but it should work.
63helpful
5answers

Codes for sylvania tv

Why to ******* yourself with codes, installing etc. I order this Movie Software before a month, and I can tell it is awesome.
Take a look
101helpful
8answers

Codes for sylvania tv

I purchased a sylvanis lcd tv and it won't work with my comcast cable remote...I can't turn it on or off with it or turn up or down the volume. i've called my cable company 3 times and they can't seem to help me. Can you help?
12helpful
8answers

Need code for universal remote Sylvania LC320SL8

We bought a Sylvania LC420ss8 HDTV.

Our current universal remotes would not work, I followed the advice on this site and got a Sony
RM- VL600 Sony Untergrated Remote Commander, use page 16 in the manual to teach the new remote off of the remote that came with the TV. It really works. I am happy with the tv and remote.
Not finding what you are looking for?

559 views

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...