I have an alpine cda-9883 cd won't eject & error

make sure your cd player is clean.

Get one of these: http://www.crutchfield.com/p_500CDA9883/Alpine-CDA-9883.html?tp=5684&tab=other_items#iPod Adapters

Check for blown fuses behind the deck and under the hood, sometimes by the battery, you may get lucky but you could have smoked the unit, and would not know anything unless you send it in to get fixed. Replacing the unit could be the answer Alpine CDA-9883 CD Player

Check for a fuse in the back of the radio, and the one in the fuse panel

your ipod might be too new,and your cd player too old the alpine cda 9883 is a 2007 model what kind of ipod do you have,if uyou have an older ipod and got the new itunes9 then try downloading an older version of itunes from itunes.com .....good luck

press & hold the eject button

press and hold the menu button until display changes then turnthe the volume button until mx shows in the display then press the tuner button to turn on that feature

Your amp is not turning on - what you should do is connect the "blue/white - remote turn-on lead" to whatever wire you have the "blue - power antenna" output from the Alpine connected to now. That should solve your problem.

My ipods fuction fine with my Alpine CDA-9885 ... have you tried pressing the display button on the Alpine? The KCE-422i cable takes quite a beating ... You might check the cables.

Disconnect the blue wire from the back of the radio and connect the blue/white wire in its place. This should fix your problem.