I have a Nokia 5800, cant connect ido bc3100 headset

sir my nokia 5800 music player on time connecting headset phone will be stuck and restart automaticaly...solution plz sir.

1: SWITCH ON THE BLUETOOTH FUNCTION ON YOUR MOBILE 2: THEN CHANGE MY PHOES VISIBLITY FROM HIDDEN TO SHOWN TO ALL 3; MAKE SURE U HAVE PRESSED THE BLUETOOTH HEADSET SWITCH ON BUTTON FOR AT LEAST 10 SECONDS . 3: U WILL HEAR A BEEP SOUND WHEN THE HEADSET IS SEARCHING FOR PAIRING 4 NOW SEARCH FOR NEW DEVICES ON YOUR MOBILE 5 WHEN THE SEARCH COMPLETES IT WILL SHOW BH-105 6 : SELECT IT AND CLICK PAIR . FINISHED

the iphone 3g bluetooth is at present for headsets/handsfree devices only and cannot link/pair with anything else (phones/pc etc) it has been deliberately crippled to force file transfer etc to be done exclusively through itunes or formate
rate my answers too

Go to settings-connectivity-bluetooth. Tap on the bluetooth symbol to turn it on.
Across the top you will see 3 menus. Tap on the middle menu button, press options then select new paired device.

hello thats a silly problem . when you are searching from your mobile the headset must be in pairing mode , instead of just switching on your headset just hold its on button for 10 to 15 sec then the headset will get into pairing mode . and then you can see it on your phone , the default password is 0000 . if u have a manual for your headset it will be a lot clear . just follow those you will get it done.

Try restriction codes here http://www.mobileunlocksolutions.com/nokia-3500/rs1wp9/

the problem was the bluetooth headset was already registered with a mobile phone ,first format your bluetooth headset by long pressing + button and power button or long pressing the poer button

how to connect
bluetooth headset to nokia 5800

Hi,

You'll have to restore your phone back to factory settings, switch it off and put it back on for you to be able to get your bluetooth working again.

Hope this helped.

Regards

the general pin for all the Bluetooth headsets is 0000

enable bluetooth on the PDA and then switch on the headset holding the Volume + button and the power button this will switch on the headset in search mode and after it searches ur PDA there will be a prompt on the screen for the pin type 0000 and the headset and PDA are paired again