Canon LBP-800 don't print on a network

Your user manual: http://www.dlink.com/-/media/Consumer_Products/DI/DI%20634M/Manual/DI_634M_Manual_EN_UK.pdf
Help: Connected Wireless Client List
Firmware for router: Link DI 634M Firmware 2 01 Free Download

Try RESETTING the D-Link back to the default settings.
Press and hold the RESET button at the back of the routerwith the power ON until the LEDs flash at the time the release the RESETbutton.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sorry, no, the DI-634M does not have the repeating function.

Are you trying to connect to the wireless network ?
If you are not getting the IP address then you might not be connected to the wireless network.
Make sure that you know all the correct wireless settings of the router.
If your network is secured then you have the correct network key.
If you are not sure about the wireless settings of the router then you will need to access the router set up.
Click Here for step by step solutions

You said you can get connection coming from modem directly? Or did you mean the modem is going into the wan port of the router?
Did you try all the ports on the router?
Did you check the cable?
Did you try turning off the wireless on your the pc and connecting via e-net cable?
Make sure it is not the pc or cable.
Also, check and make sure a firewall is not waiting for you to add it to the trusted sites list.
Are you getting an IP when you plug in the cable and are the lights lit up on the router and nic?
I would make sure you got a connection to those ports via another computer before moving on, and try using all the ports with a different cable if possible.

Sure you can! As you can with any wireless router pretty much.

1. Assign the new router (AP) to an IP on your subnet that's not your existing router's IP... i.e. 192.168.0.2
2. Disable the DHCP server on the "AP"
3. Create a new wireless network on the "AP"
4. Plug your existing network/router into a LAN port

DO NOT USE THE WAN PORT

Voila! You have an access point!

go to this link to to reset your d-link 634m manually: http://www.retrevo.com/pdf/426bh043/6/Hardware+Overview#q=D-link+DI-634M

http://support.dlink.com/faq/view.asp?prod_id=2229&question=DI-634M

- Take a visit.

I hate it when ISPs give you devices that dictate how your network has to be setup. They should just give you a modem which give a public IP to whatever connects to it.

For this to work you have to connect the cable from the hughes box to your router on one of the four regular jacks on the back NOT the internet/wan jack you would normally use.

Set the IP of the Dlink to 192.168.0.254
Subnet mask 255.255.255.0
default GW 192.168.0.1

This SHOULD allow the router to act like a switch. I have a linksys that has an option to make it function as an access point , which is what you need for this modem, but I dont see any option for the d link you have to do that.

Hughes have a knowledgebase which may be of some use to you.

Here

Hi,

If I understand your post/description:
1. You have both wired and wireless clients tied to the DLink DI-634M router;
2. The 1st PC is a desktop that uses Ethernet connections to the DLink and is currently working;
3. You have another (2nd) PC (a laptop?) that is connect by WiFi to the router. This is not working now;

I think that your issue may have to do with the Wireless networking of your 2nd PC, i.e. if you can access 192.168.0.1 (DLink DI-634M) from the 1st PC that is wired.

Should this be the case or the scenario is different, pls post back.

Hope this be of initial help/idea. Pls post back as requested or should you be in need of additional information.

Good luck and kind regards.