UNLOCK CODE FOR SAMSUNG J600

Hi, I used this service to remove "Invalid SIM card" problem, so probably it can help you too. See here: http://www.fastgsm.com/en/samsung/samsung/sgh-j600/unlock-code/network-unlocker

hi are you in need to unlock your samsung j600 mobile from network then codes are the best solution to unlock it .to purchase codes visit unlocking4u.com here they ask you the network name to which your mobile is locked .then they send you codes to unlock your mobile.

Do not worry it just takes 5mins to solve it...
follow these stps.
1.Call the customer care from NOTHER sim of SAME NETWORK and ask for PUK code of your number ,He will tell you and type it in your mob. screen.
2. definitely it gets unlocked.
3.I too had once same problem .i did this and finally my phone unlocked...

You can try Unlock code from the Online site...

To Unlock the Mobile from the Network Lock....You can use the Unlock code,You can get the Unlock code here
http://www.theunlockspot.com/samsung-sgh-j600/rs10wp9/ and Unlock the Mobile.......

If you get unlock code for free means, it is not safe and sometimes it may lose data also,
you can get the unlock code at very low cost, through this site http://www.unlocking4u.com/samsung-sgh-j600/rs6wp9/
It has the best instructions and easy methods for unlocking your Samsung model mobile phones.......

try my site got a book on there full of unlock codes . look for unlocking software or take to a phone shop to unlock

you will need to get it unlocked in a shop 10-15 pounds

two codes you need to know!

FULL RESET: *2767*3855#
NETWORK: *#9998*638#

Basically first do a Full Reset (this is deletes Everything saved on the phone; But this is isnt the firmware so its safe)
Then insert whatever SIM card you want and type in NETWORK (*#9998*638)... your phone will freeze for a sec (this is normal) and the restart... youll get a message saying "Please Wait..." and then you phone is working

NOTE: The NETWORK (*#9998*638#) code has to be typed in every time you start the phone

MY o2 j600 (J600AYGF1) was "Phone Locked, Return to service" and then i used this code and it was fine...
My j600 is now back to normal by typing #0111*RANDOMCODE# and the incorrect password message came up and tyhen worked
!!!!!!!!BUT PLEASE DONT DO THIS COZ IT WAS LUCKY!!!!!!!!

need an unlock code for my phone, SGH-J600, samsung

tank you