How can program a bearcat 210 XL scanner with new numbers

Press the "Manual" button. Enter the frequency using the number keypad. Include the decimal when entering the number. Press "E" to set the number. Press "Manual" to move to the next channel and enter the next frequency. Continue until you have entered all of the frequencies

Read more : http://www.ehow.com/how_7198180_program-bearcat-210-scanner.html

Here's a link to the manual for the UBC175XL. It shows the Australian frequency bands, but programming and operation are identical to your scanner.
http://www.uniden.com.au/RESOURCES_MAIN/pdfs/UBC175XL.PDF

Bill B.
Listening in since the 60's

Simply have it on the channel you want to program and push the correct set of numbers like 162.550 and press the Enter key and it is done repeat this for each channel and you are done.

Nice old scanner, key word is old. Probably an electrolytic capacitor in the power supply is dried-up and needs replacement. Do you get the hum if you operate the radio off of 12VDC?

From your request I can't tell if the scanner has a problem or if you just need to program the correct frequencies into it. If you need the frequencies for your area, please visit
www.RadioReference.com
or
www.CityFreq.com
for an extensive database of active frequencies and systems in your area. NOTE: Any trunked or digital systems in your area cannot be monitored using the BC-210. If your area has switched to these newer systems, you will need to upgrade to another scanner to follow all the action. If you have any other questions concerning your scanner please give us another shout.

hello there: here is a link for you that will help out ok
best regards mike

How to Program a Uniden Bearcat Scanner BC 140 | eHow.com How to Program a Uniden Bearcat Scanner BC 140. Programming a Uniden Bearcat ... How to Program a Bearcat 5 Scanner. How to Program a BC 560XLT Scanner ...
www.ehow.com/how_5009391_program-uniden-bearcat-scanner-bc.html - 57k -

I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:

1. Press the MANUAL key to advance to the channel that you wish to reprogram.

2. Enter the new frequency, including decimal point.

3. Press the ENTER or E key.

4. Start over with step one to continue programming channels.

hi . i w given a Uniden Bearcat 175XL 16 channel scanning radio. the OPERATION buttons are: PRI SPEED WX LIMIT SRCH HOLD DELAY LOCKOUT and in orage color: SCAN MANUAL. please help. the only thing i can get to hear is the WEATHER CHANNEL. i cant even hear the squelch. can u help

I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?

The Bearcat 210 Manual specifically states that the lowest freq available is 32MHz.