It will not download the videos to me computer and I dont have the manual or software disk.

Download from JVC support site, or else card mfr's site

Hello,

All Sandisk "Answers" links for the e260 software:
http://kb.sandisk.com/app/answers/list/kw/software/p/555%2C618%2C621/r_id/101834/search/1

Manual e200v1:
http://mp3support.sandisk.com/downloads/um/e200v1_userguide_en.pdf
Manual e200v2:
http://mp3support.sandisk.com/downloads/um/e200v2_userguide_en.pdf
Manual e200R Rhapsody:
http://mp3support.sandisk.com/downloads/um/e200r_userguide_en.pdf

How to use Windows Media Player 10 or 11 on the computer:
http://kb.sandisk.com/app/answers/detail/a_id/389/kw/software/p/555%2C618%2C621/r_id/101834

How to ad pictures and videos on the Sansa:
http://kb.sandisk.com/app/answers/detail/a_id/564/kw/media%20converter/r_id/101834
Download the Sansa Media Converter for converting pics and videos:
http://mp3support.sandisk.com/sansa/SMC



How to update the firmware on the player e200 series:
http://kb.sandisk.com/app/answers/detail/a_id/306/kw/firmware/p/555%2C618%2C621/r_id/101834

> Sandisk forums <
Link to Firmware e200v1:
http://forums.sandisk.com/sansa/board/message?board.id=e200&thread.id=15209
Link to Firmware e200v2:
http://forums.sandisk.com/sansa/board/message?board.id=e200&thread.id=13548
Link to Firmware e200r Rhapsody:
http://forums.sandisk.com/sansa/board/message?board.id=e200R&thread.id=2280

copy your canon video to computer, and then edit.

Try to play the video using the software that came with your camera. if you dont have the disk.

Download it for free here:
www.kodak.com/go/easysharesw

Option 1:

If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

Or you can purchase the software disk from this link:

https://servicesales.sel.sony.com/ecom/accessories/web/productSearch.do?searchOperation=partSearch&searchText=266675501

NOTE: Since the original supplied software is not available for free download now.


Good Luck!!!!!!!!!!!!

Drivers and owners manuals can be downloaded HERE. There was a firmware update for the DV-5040 in July of 2009. This can be downloaded HERE, but be sure to follow the directions exactly. If you are referring to the editing software by Ulead, any editing software will work.

I always recommend having a version of your users manual on your computer, because it is so much easier to search through the manual quickly to find what you are looking for.

You can find a digital version of the users manual for the Sanyo CG9 here, and you will also find the free software for downloading videos to your computer and watching them there.

Once your videos are on your computer, you can burn a data disc without any commercial software. Some DIVX or XVID dvd players will play these data disks and you can watch your movies like that. An .MP4 data DVD will hold much more video than a standard DVD video disk because it squeezes it much tighter. You can play your .mp4 videos through a PS3 using a data dvd or a thumbdrive.

If you want to convert your mp4 videos to a standard dvd that will play in any dvd player, you will need commercial conversion software such as ULead MovieFactory or Nero Vision. MovieFactory was included with some sanyo camcorders, but if you have lost your disk, they do not allow you to download it from their website.

I hope that helps!

You can go to the cybelink website and download a trial copy of the software that came with the camcorder. The software is ; Cyberlink Power Cinema, Power Directer, and Power Producer. The camcorder's format is also recognizable by Mac. Or if you dont want ot eventually buy the new software you can manually change the file extension of you movies off the camcorder to .mpg to view back your video using windows media player. Until you get editing software, you would not be able to edit your movies. Adobe Premier Elements 4 works fine with .mov files and Final cut pro.

get it here

hope this helps
thanks for your rating

plug the camera into your pc once you have uninstalled the canon software as this will enable you to see the camera as an external hard disk and you will be able to copy your pic,vids and anything else on your cameras memory to your computer. here is a link to the manual http://software.canon-europe.com/files/soft24124/manual/A85_CUG_EN.pdf