MY OVEN WON'T WORK. I TURN ON THE TEMP AND IT JUST STAYS AT 100 AND NEVER RISES. MY BROILER AND BURNERS WORK. COULD IT BE MY IGNIGTER OR SENSOR?

It could possibly be you are not getting 240 volts to the range. The top igniter may be getting a current back through the other side of the 240 circuit and that is why it works when the oven is turned on but the oven will not be getting power to heat. Have the 240 circuit checked or make sure the circuit breakers are reset correctly.

[email protected]

if you can see the ignitor glowing on either the broiler or the lower area of the oven then the gas valve is bad and not opening anymore,sometimes the ignitors are the culprit as they are in series with the gas valve and if weak wont let the valve open,but both upper and lower burners not operating i would suspect a gas valve first

Problem with oven sensor or control board (ERC). Oven sensor at room temperature should have resistance about 1080 Ohms, and it rises with temp rise.

does the oven have a light that comes on when you open the door? check to see if that works. either way the door switch may be dislodged or broken

you need to replace the oven ignitor

Likely your oven igniter is bad. Part number 74007498

the glow bar stays on in gas ranges the whole time the cycle is running if it didn't the safety valve couldn't open its normal