For i need a code to use with sony rm-vl600t tv remote control for use with an acoustic solutions astvd 3119ws 19'' hd lcd dvd combi(0.69 seconds)

Hi, you can order a new RRMCGA759WJSA from Replacement Remotes. or you can order the keypad repair kit from replacement remotes to fix your keypad problem. You need the solution that is sold in the kit to fix the rubber keypad for those buttons.

Hi Hazel,


The common codes used for Matsui TV are 098 and 178, however if these codes didn't work, please let me know the exact model number of your universal remote control to determine the right/other codes.


Kind Regards,


Mjsazon

Hello
Motorola HD/DVR is not lited with codes of Sony RM-V60. OK.

cerco schema tv astvd 31119 s2id hd

[email protected]

The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

these built in tv/dvd players have this problem the laser inside tends to burn out. being unable to read discs. it may be dirty and you can try to clean it with a laser disc cleaner or by blowing the dust out with compressed air . but more than likley the laser is damged and you will have to go into a repair shop.

Buy a learnable remote.

http://www.xdiv.com/remotes/

Hi I have an acoustic solution 19 in tv with dvd player ASTVD - 3119 .
I can seem to get the menu off the screen it appears each time i change channel or press any button at all on the remote.can you help me please

hi need code for sky+ remote to use on hitachi L42VPO1U