Need code for programming rca tv wiht a sony

1. Turn on the component to be programmed.
2. On the remote control, press and hold the S button.
3. While holding the S button, press and release the POWER button
4. Release the S button.
5. Press and release the appropriate component button for the component being set up.
6. While pointing the remote control at the component, press and release the CH + button.
7. Press and release the POWER button.
NOTE: Repeat the previous two steps until the component responds. It may take 70 tries until the correct code is located.

8. When the component responds, press the ENT button.

Hello

Very sorry to say that your Sansui Tv is not listed in the codes of Sony RM V202. Its codes contains only one Sansui product and it is ; Sansui VCR, and its code is 017. OK.

Hi,
Click Sony Support to download required user manual free copy.
Click HERE to download remote control code list.
Thanks.

Press SET and POWER button at the same time, press TV,press and release the CH+ button,then press and release the POWER button, each time you press CH+ and POWER button a code is entered. Keep trying until the TV goes Off. It may take 70 trys, when it does turn off press ENT.button to save code. hope this helps..

i dont think it does,i would try the rca universal remote it has the codes for dvd players

this is a pdf but try this:

http://www.remotecodelist.com/remotes/sony/sony_rm-v202.pdf

Hooked up our analog TV set with Magnavox TB100MW9, the video is not stable. Any advice on WHY?
unlhook it, the video is OK.

do a search online for sony model # manual. i found this site.

http://esupport.sony.com/US/perl/model-documents.pl?mdl=RMV202

To program your Sony Universal Remote control for an Emerson TV try - one by one - the following numbers: 022, 013, 020, 021, 003, 015, 042, 034

I need the code for operating an emerson television